Door Occupancy - Slide Marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An occupancy slide IN/OUT marker for a door. It can be used for breastfeeding rooms, bathrooms, and other reasons.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
This occupancy slide marker was designed for someone who needed it for a door. I figured I would share it with the 3D printing community. It's an ease to print model that to make and use. It slides over smoothly to cover the IN or OUT part with ease!
The dimensions: 25.4 mm (1 inch) x 127 mm (5 inches) overall height is 6.2 mm (¼ of an inch).
Use a strong glue of your choice (Gorilla Gel Glue was used for the one in the picture) and apply a thin line on both “Edge Caps” bottom. This will help to keep it in place for a long time. There is a whole and split model for the “IN” and “OUT” slide-bar you can choose from if you desire different colors for the IN and OUT without using a multi-filament unit.
Recommend to print the “Slide Cover” on it's end; in a standing position.
I used the perimeters as follows but you can use your own settings:
- Layer Height: 0.18 mm
- First Layer: 0.36 mm
- Outer and Inner Wall: 0.36 mm
- Top and Bottom Layer: 0.36 mm
- Wall Count: 2
- Infill: 100%
- Infill Pattern: Monotonic Line
- Supports: None
- Brim: Outer Brim Only at 3 mm width and the object gap at 0.2 mm
I hope this model is useful to someone who needs it. Please give feedback and share a picture of your version whenever you can.
Have a great day!