Sparkmaker Resin Bottle Pouring Spout with Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This pour spout screws to the top of Sparkmaker resin bottles and has a drip-catching design so you can shake the…
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 857
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This pour spout screws to the top of Sparkmaker resin bottles and has a drip-catching design so you can shake the bottle, let the resin drain back, and fill the vat without getting resin everywhere.
The base screws onto the bottle and has a taper that seals against the inside lip of the bottle. It should be screwed down fairly lightly.
The lid should screw and unscrew relatively easily - although it takes a few tries to deburr it so it is smooth
Print Settings
Printer:
Dremel 3D40
Rafts:
No
Supports:
No
Resolution:
300um
Infill:
20%
Filament:
Dremel PLA
doesn't matter
Category: 3D Printer Accessories