Sparkmaker Resin Bottle Pouring Spout with Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This pour spout screws to the top of Sparkmaker resin bottles and has a drip-catching design so you can shake the…
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 93
- Makes
- 1
- Views
- 857
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This pour spout screws to the top of Sparkmaker resin bottles and has a drip-catching design so you can shake the bottle, let the resin drain back, and fill the vat without getting resin everywhere.
The base screws onto the bottle and has a taper that seals against the inside lip of the bottle. It should be screwed down fairly lightly.
The lid should screw and unscrew relatively easily - although it takes a few tries to deburr it so it is smooth
Print Settings
Printer:
Dremel 3D40
Rafts:
No
Supports:
No
Resolution:
300um
Infill:
20%
Filament:
Dremel PLA
doesn't matter
Category: 3D Printer Accessories