Ultimate low stack ZWO 2" eyepiece adaptor for Baader CoolCeramic Herschel Wedge on Vixen ED / AC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This screws into any of the ZWO ASI range of cameras T42 male thread becoming the lowest stack height to save back focus
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Share Alike
If your refractor telescope has limited back focus, then this adaptor allows you to save up to 30mm compared with standard adaptors, and means you can achieve perfect focus. This also means you can easily swap over the ZWO ASI585MC (or similar from the range that has a M42x0.75 front flange) for an eyepiece.
***Always check you have already screwed the Baader Continuum and ND3 filter into the Baader CoolCeramic Wedge or you could hurt your eyes etc read the instructions carefully***
I would recommend printing it on ultrafine definition, I have a 0.6mm nozzle so it will be great on that or a 0.4mm nozzle. Its best to place the flat end onto the build plate, the top has a chamfer so that any elephant foot is mitigated.