Angled 50ml Falcon Tube Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
50ml Falcon Tube holder that can be angled and installed in a shaking incubator. Holes are 28.2mm apart.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- GNU General Public License v3.0
In our lab we have a shaking incubator. For reasons, some things prefer to be shaken at an angle. I have included two bottoms for the tube holder, one with holes, the other without. Our incubator has a plate with 28.2mm hole spacing, so the bottom plate is configured for that (I assume that is some sort of standard). However, I have included the non-holed version as well.
To make this you need to print:
- One bottom part (preferably the one with holes)
- One middle part
- 4x Male Screws
- 2x Female Screws
Additionally, you will need:
- 2x M4x16 bolt (to attach the holder to the bottom part)
- 2x M4 Nut (to attach the holder to the bottom part)
- 2x M4x10 bolt (to attach everything to the incubator bed)
Print the Falcon screws and lightly superglue the printed parts and nuts and bolts together. I recommend ABS/ASA for the screws, but PLA will do fine.
Then print the bottom and middle part of the tube holder. We print it in PLA, as we work at ~37°C, but you can also print it in ABS/ASA if your incubator runs hotter (for whatever reason).
The two shorter screws are used to fix the holder to the base plate. Our plate has limited space underneath, so don't use bolts that are too long.
Have fun.