Liczymy pasujące modele…
Slim cans or "sleek" cans do not fit well in all cup holders. This adapter has a flexible design to work well in a wide range of vehicles. I have tested in multiple vehicles without any issues. Print using a material that won't melt in a…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
TAMIYA - stack container for 2x 250ml Lacquer Thinner compatible with: TAMIYA - stack container for 6x 23ml color glasses von stefancham | Kostenloses STL-Modell herunterladen | Printables.com
Wydruk około 5,91 €–7,23 € nettoWstępna wycena jednego wariantu
Material: 458g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P2, P3 Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x16…
A sleeve for 250ml cans that keeps your drink cool in the summer. I printed the part with the following settings: Wall thickness vertical: ca. 0,45mm (only one perimeter) Wall thickness horizontal: 0,75mm Infill: 10% Grid Resolution:…
This is a superloop for applying large volumes of sample in an FPLC System using 50ml syringes. Use Fill one 50ml syringe with the sample (up to 60ml fit) Place it in the superloop and rotate the syringe so that it is held in place by its…
A clamp to mount 50 mL tubes to an orbital shaker. The tube fits snugly in the bottom clamp, the cap sinks into a divot so the rim is prevented from moving while the shaker is in motion. The bottom clamp screws into the shaker platform…
Designed and 3D printed this sleek two-tier mini bottle display to showcase 50ml liqueur and whiskey samplers in a premium way. The built-in LED light groove enhances each bottle with a clean underglow, creating a modern floating effect…
2 versions available for each: Recessed version for 1.18" x .08" tape. See example here Flat back model without recession for mounting flexibility Inserts available if you want to have bottles facing down. They are a light press fit by…
A simple storage container for the popular BRS 3000 burner to be stored underneath a 100g gas canister inside of the Toaks 750ml pot. The compartments on the sides could be used for storing other small items. There is still room at the…
Material: 550g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P2, P3 Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
Material: 458g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P2, P3 Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x16…
In printed with PETG with 0.2mm nozzle. Print without support. Check and clean the printed object properly to prevent damaging textiles. Other laundry helps measuring cup for liquid detergents:…
Material: 550g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P2, P3 Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
Mount a 50ml centrifuge tube using a medium Command Strip (3lb rated). I am personally using this to mount a temperature sensor inside my kegerator. Feel free to use it as you like. I can totally see this being used to hold some bamboo or…
Designed and 3D printed this sleek two-tier mini bottle display to showcase 50ml liqueur and whiskey samplers in a premium way. The built-in LED light groove enhances each bottle with a clean underglow, creating a modern floating effect…
5mL or 15mL + 50mL conical tube holder. We have something similar in the lab and I wanted more, so I made them!
Installation & Required material This model requires specific hardware for mounting: 4x Magnets : There are slots designed for block magnets sized 50x10x2 mm. You will need to glue these into the back recesses. 3x Screws : The model…
Je stocke mes poivres, épices et sels dans dans bocaux de 250ml de ce type : https://www.amazon.fr/dp/B09RF17R9W?ref=ppx_yo2ov_dt_b_fed_asin_title Ayant fait l'acquisition d'un moulin à poivre Maestro de Peugeot, très pratique avec ses…
There are two versions of the rack: with a "MAX 65°C" reminder text embossed in the wall (intended to be printed in PETG) and a version without any text. Line width: 0.5 mm (the walls of the model are exactly 1 mm thick). Layer thickness:…
Keep your lab bench organized and efficient with this 50ml conical tube rack. Designed for maximum stability, it prevents sample tipping and keeps your workspace tidy during experiments. Optimized for 3D printing in PLA or PETG, this rack…
50mL magnet tube holder made for magnetic bead purification assays. I've made a single and double version, as well as an adapter to accommodate 15mL tubes as well. Each side uses: 2 - 60mm x 10mm x 3mm bar magnets, and 1 - 12mm x 1.8mm…
Since I get borred of bad lids. I created a 250ml can lid. It fits perfectly and can be reusable milions of time and still prevents taste of beverage. When you push it a little bit it pops up. You can print if from PLA or TPU. Both works…
This is a rack designed for robotic experiments with vials. It has high level of fit tolerance so it's easier to teleoperate robots to put the vials in this rack.
A funnel for the 750 ml True Fruits bottle. Can be easily printed without supports. I printed it using PLA with 2 wall and 10% Infill.
Verwandle deine 250ml Standard-Energydrink-Dose in einen massiven Becher! Dieser Halter ist optisch einer Patronenhülse nachempfunden und verfügt über einen markanten, ergonomischen Griff mit Fingermulden für maximalen Halt. Passform:…
Der Deckel rastet auf einer 2500ml Dose am Rand ein. Dadurch können Fremdkörper nicht in die Dose gelangen (z.B. Bienen, Wespen etc.) Es handelt sich bei dem Modell um ein sogenanntes Print In Place, d.h. das Modell besteht aus einm…
A clamp to mount 50 mL tubes to an orbital shaker. The tube fits snugly in the bottom clamp, the cap sinks into a divot so the rim is prevented from moving while the shaker is in motion. The bottom clamp screws into the shaker platform…
Ein Neuer Deckel für die True Fruit 750ml Flaschen mit Trinkhals. eine Handvoll vorteile bietet der neue Deckel. z.B er Rostet nicht, das Trinken ist einfacher und einfach zu drucken :) Das ist das Grundmodell. ein Stopfen und Neue…
We all love our Vision Miner 50ml Nano Polymer from MatterHackers, or maybe you vape! Perfect bottle fit, gridfinity and style.
Ich habe einen Halter entworfen für die IKEA 750 ml Behälter. Ideal um diese als Pizzastation zu nutzen. Auf dem Foto ist die Version mit 45° Winkel es gibt noch eine etwas flachere mit 30° Winkel Link zu den behältern…
Ikea POKAL glass handle prepeared for 3D printing. Frictional joint allows to hold handle on glass and support it's own weight even with PLA filament
This is a bottle crate I designed to organize the milk bottles for my twins. It can hold up to 250ml bottles. (All bottles up to 65mm diameter and 145mm high.) If they are higher, you can't stack the crate anymore). Most of the time, the…
<Expanded description coming soon>
2 versions available for each: Recessed version for 1.18" x .08" tape. See example here Flat back model without recession for mounting flexibility Inserts available if you want to have bottles facing down. They are a light press fit by…
this is a holder for a 50ml bottle of bsi super glue, which was made on onshape
Doporučení tisknout na stojáka pak podpěry nejsou potřeba tisk z petg výplň na 40 procent z důvodu zachování ohebnosti
My original TOASK bag (15g) looks little bit tired so I made this clip (6g) to hold lid. As side effect I reduce the weight of my cooking set. It should be OK also for 650ml version.
Halterung für 250ml Dosen. Kann angeklebt oder geschraubt werden. Holder for 250ml cans. Can be glued or screwed on.
True Fruits Trichter für die 750ml Flasche gedruckt mit 15 Prozent infill und der 0,4 hf nozzle gedruckt. über likes makes und follower würde ich mich sehr freuen, Peace MazZe
True Fruits Trichter für die 99ml 250ml Flasche mit 15 Prozent infill und mit der 0.4 hf Nozzle gedruckt. über likes makes und follower würde ich mich sehr freuen, Peace MazZe
This holder is made to hold 1 Voopoo Doric e-cigaret, with 3 pods supports and 4 e-liquids 50ml supports. I use it in a drawer, and I was tired of having my bottles and stuff falling aside every time I was closing this drawer. That's why…
This insulating holder is useful for flash freezing small samples without using too much liquid nitrogen. Ensure you use borosilicate glassware to prevent cracking. You may need to adjust the hole size, as not all beakers are the same and…
Schraubverschluß für diese braunen Glasflaschen mit Kunststoffeinsatz. Paßt auf Flaschen mit 50ml und mit 100ml Inhalt. Gedruckt mit PLA, bei "Nahtposition zufällig" paßt das Gewinde am leichtesten. ……………… Screw cap for these brown glass…
Schraubverschluß Schraubkappe für diese braunen Glasflaschen mit Kunststoffeinsatz. Paßt auf Flaschen mit 250ml und mit 1000ml Inhalt. Gedruckt mit PLA, bei "Nahtposition zufällig" paßt das Gewinde am leichtesten. …………………… Screw cap for…
I wanted to gift small bottles of Makers Mark to friends in a festive way so I designed this. It looks cute standing and
Holds a Diamine 50ml bottle of ink to help prevent accidental tippage.
I designed this rack to use with 50ml test tubes, my partner uses it to store paint for figures (specifically, primers). For the assembly, you'll need: - 8x M3 threaded insert (the holes in the distancer are 4,6(D)x6mm) - 4x M3 flat head…
I'm organizing my workplace, and I couldn't find a Gridfinity holder for 50ml bottles of Loctite, so I made my own! The base accepts magnets if wanted, and as most gridfinity bins; it prints well in almost any filament on any printer!…
A simple storage container for the popular BRS 3000 burner to be stored underneath a 100g gas canister inside of the Toaks 750ml pot. The compartments on the sides could be used for storing other small items. There is still room at the…
gasket / spacer for 250ml ink bottles on XP600 DTF printers. Print out of TPU or other flexible material to seal the ink bottles and space out the cap so it only engages a few threads. Make sure your air filters aren't clogged or you will…
A rack for 50ml falcon tubes (29.2mm diameter). Printed with creality k1c hyper pla 0.2mm 15% infill
bottle case for 5ml, 20ml and 50ml the bottles are from here: https://www.aliexpress.com/item/1005006061515843.html -> they are not all 100% the same height, i took the highest to build the cover if you need a specific height, let me…
This is the 3X1 Falcon tube rack I needed for work. Your lab probably has many racks, but does it have one that you printed yourself? Have you gifted your co-worker a falcon tube rack, and seen the look of confusion as they ask, “You did…
A Gridfinity holder for Ikea 365+ food containers in 750 ml size. Uses 4x4 standard size (42 mm) units, supports magnets. For minimal print time and material use, I recommend printing without bottom layers, 5 % infill on draft quality…
Simple Multiboard 250ml dual Tamiya thinner bottle holder. Push fit for Multiboard snaps. Printed on Bambu X1C using grey PLA pro filament as pictured.
I designed this cup for portioning detergens. Please keep in mind that this should not be used for food . Ive replaced the original model with a sturdier version since I managed to break the cup this morning. Changes: increased overall…
I bought myself a houseplant. I downloaded and printed the most popular watering can on printables. I didn't like how it felt in my hand so I decided that it's the perfect excuse to design my own :) . The main feature of this watering can…
Red Bull Carrier for 6 cans (250ml) | >>>> There is a 330ml Version too! <<<< (note: There are 2 versions ! One with and one without the RB Logos ! PETG ftw!)…
A low-poly bulbasaur designed to hold a 50mL conical. V1 will hold a 50mL conical, albeit loosely. The right eye needs a correction, there's a strange gap that doesn't show up in the 3D model. The conical insert is slightly off-center.…
I lost the TOASK lid—no issue. Based on some research, using a pot lid has no effect on boiling speed. Therefore, I made this cap to hold my cartridge and stove inside. The weight of the 750ml pot, plus this cap, is now 96g. My printing…
This is a cap for the Iroshizuku 50 ML bottle. Mine broke, this one works great, you just need to save the paper/plastic top that goes on the inside to seal. Print instructions Category: Office
I love having multiple coffees on hand, and now I’ve found a nice way to keep things organized. I store 20g of coffee in each centrifuge tube. For every bag of coffee, I have a box under my desk where I keep all the filled centrifuge…
Bottle cage designed to fit a 750ml Camelbak water bottle. It's a bit oversized for biking, but it's what I had available. Should fit other similarly sized water bottles - but keep in mind that the design is primarily static. Includes a…
2026.08.04 Update (v2) - Added Large Flange versions, bigger footprint = better stability. 2026.08.05 Update (v2.1) - Added a one-size version, redid TinkerCAD to make it easier to edit. about OpenBenchTop I started a personal project…
Ganz einfach zu drucken , wurde mit Petg gedruckt. Ganz einfach zu montieren und muss keine Angst das es abfällt.
Barely visible drink can linker Can be used when bulding wall from these types of can (Red Bull etc.)
Tired of your drinks rattling around in the cupholders of your Hyundai i30N? This custom-designed cupholder insert offers a snug, no-rattle fit for standard 330ml/250ml beverage cans. Whether it’s a soda or an energy drink, this insert…
This lid can be used in the field to keep specific specimens alive until further analysis.
https://MineeForm.com/ ✅ Unlock All STL Files Immediately ✅ Make Money by Selling 3D Prints ✅ Only $10 a Month (Cancel Anytime) Category: Models
This is a modified version of this container by @MartinO . I liked the idea of storing my stove and fuel in my pot, but the file this is based on used a BRS stove, which is much smaller than the MSR stove. I modified the file so it now…
Organize your spices with this sleek, modular drawer holder designed for 50ml spice jars (e.g. AliExpress item 1005003362200554 ). Each unit holds one jar and connects smoothly to the next, letting you expand to any drawer size. Perfect…
A 2-part model designed to firmly but gently hold a 50ml Fisherbrand or Falcon centrifuge tube (model based on the Fisherbrand™ 431176 ) for radiography or tomography. The holder is designed to attach to a metric optical breadboard with…
Original description Simple Skoda Octavia 1 cupholder for 2 500ml cans. Doporučuji ze spod přilepit pomocí tavné pistole nebo siliconu. My desc Originally, I made this edit for my friend, but many of you asked for it and where you could…
I wanted a sort of stabilizer for my cans, because sometimes I'm a bit clumsy and those cans can pretty easily fell over. I have 2 sizes. One is pretty tight, but the 250ml cans do fit with a little bit of force and the other is a bit…
just use tinkercad, no chamfer or anything. print using TPU. set infil 10-15% to create ‘air pocket’ for cushion when bottle drop.
A small (approx 50ml) all purpose / all around grease container including open or closed lid.
Fits international 1kg 850ml (30 oz.) cans Ø=99mm H=119m (Ø=102mm max / H=122mm max). The files provided are only for the left side and need to be mirrored in the slicer for the other side. Print settings: Infill=15% gyroid /Layer…
A storage canister with a screw-on lid used for keeping solutions contained within 50mL conical (Falcon) tubes protected from light. Ideal for solutions containing light-sensitive reagents such as imidazole, phenol, and antibiotics (e.g.…
Dosing spoon with different volumes: 10ml 15ml 20ml 25ml 30ml 40ml 50ml With practical eyelet for hanging. Quick and easy to print and practical for dispensing powders or liquids. Feel free to write to me if you want me to add more sizes…
Messbecher 50ml z.B. für Waschpulver oder auch Flüssigkeiten. Achtung! Die 3mf-Datei ist für das Filament “Marble-White von Amolen” modifiziert. Dieses ist zwar schön anzusehen, aber es benötigt extra Einstellungen (Temp, Vorschub). Zwar…
Tired of playing fridge Jenga with your Mepal Modula 550ml containers (approx. 22 x 16 x 4 cm)? These stackable trays let you slide out any box without disturbing the rest—like a fridge ninja! Print in different colors to quickly spot…
4x4 and off road culture is BIG here in Australia. Personally, nothing beats the feeling of finding that perfect scenic camping spot in the middle of nowhere, setting up, and having a cold one while watching the sunset. In reality, it's…
Cup 3d printed with specific setting named (fizzy skin) Material: PETG (do not print with PLA) Nozzle temp: 235°c Infill:100% bed temp: 60°c.
We needed this modified lid to collect samples in the field and used an 2 ml reaction tube ( bottom cut off) as new openig for the 50ml falcon. This way we had an easy acess 50 ml tube but a safe sealed lid so the insects could not get out.
Hi everyone! I present to you my second ever print and first remix. Remixed of the Versirack (https://www.thingiverse.com/thing:4735609) designed by BoeseBande. The original is an interesting design but I felt that there was not enough…
This is a carrying tray for 50 ml centrifuge tubes, with space for 6 tubes. I use it to collect samples from plants and insects in our garden, which I later inspect under the microscope. As for tube compatibility: each hole has a diameter…
Various sizes. Easy to print. Preferably in PETG. Have fun with it.
In our lab we have a shaking incubator. For reasons, some things prefer to be shaken at an angle. I have included two bottoms for the tube holder, one with holes, the other without. Our incubator has a plate with 28.2mm hole spacing, so…
Material: 550g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P2, P3 Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
Simple funnel for the (at least in Germany) popular True Fruits 750ml glass bottles. Remix of https://www.printables.com/model/864640-true-fruits-trichter-funnel-750ml with less overhang. All creds to…
I made a little holder for my Redbulls and other energy drinks that are in 250ml cans. Mainly because they don't stay put well in a Robocup cup holder. And I decided to use the existing dovetail system, because I had made a robocup…
I have not tested this. This was an earlier design, before I settled on this one , so I didn't even bother to print this out to test it. Technically it should work, but no guarantees. I prefer the dovetail one but if someone prefers this,…
