Lightweight 50mL Falcon tubes rack - 100g of filament only
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sturdy but lightweight rack for 50 mL Falcon tubes (18x). Requires only about 100 grams of filament
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Chemistry & Biology
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are two versions of the rack: with a "MAX 65°C" reminder text embossed in the wall (intended to be printed in PETG) and a version without any text.
Line width: 0.5 mm (the walls of the model are exactly 1 mm thick).
Layer thickness: 0.16 - 0.25 mm.
Supports: none.
Material: tested with PETG, but most other non-flex materials should be fine.
Minimum printbed size: 215 x 110 mm and above for one rack, 225 x 225 for printing two racks at a time.
The idea behind creating this model was making a lightweigh, cheap to print rack that can securely hold and automatically center Falcon tubes. The spacing between the tubes was designed to accomodate the tube caps without interference (tested on Greiner and Corning tubes).