1 / 4
Lightweight 50mL Falcon tubes rack - 100g of filament only — image 1
1 / 4

Lightweight 50mL Falcon tubes rack - 100g of filament only

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A sturdy but lightweight rack for 50 mL Falcon tubes (18x). Requires only about 100 grams of filament

Rating
0 / 5
Likes
7
Downloads
70
Makes
0
Views
179
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

There are two versions of the rack: with a "MAX 65°C" reminder text embossed in the wall (intended to be printed in PETG) and a version without any text.

Line width: 0.5 mm (the walls of the model are exactly 1 mm thick).

Layer thickness: 0.16 - 0.25 mm.

Supports: none.

Material: tested with PETG, but most other non-flex materials should be fine.

Minimum printbed size: 215 x 110 mm and above for one rack, 225 x 225 for printing two racks at a time.

The idea behind creating this model was making a lightweigh, cheap to print rack that can securely hold and automatically center Falcon tubes. The spacing between the tubes was designed to accomodate the tube caps without interference (tested on Greiner and Corning tubes).

Tags