Undertable shelf mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support model to assemble a little aux shelf to mount under a table or a big shelf. Good for an audio interface.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
There are plenty of audio interface holders designed. This shelf is made for the same purpose, but can workaround two withdraws of the holder mounts:
- Holders are not universal. Each one are designed for a specific model. The shelf is universal.
- Holders are hard mounts. It is useful when user wants to press a button or pull a wire. But it makes also easy to damage an obtrusive knob or plug. With the shelf device may be just moved a bit by accident.
The model is only for supports. 4 supports may be mounted on any appropriate board. E. g. I used a A5 sized plywood list.
The bottom supposed to be mounted with screws or bolts. A done shelf has mount holes, but also can be mounted with a firm double-side tape (like transparent silicone one).
It is able to tune some dimensions with a spreadsheet of the FreeCAD project.