Snap-Fit: 3M Versaflo Ledlenser Adapter Mining Lamp Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
H8R Series Ledlenser Lamp Snap-fit clip for 3M Versaflo Respirator Masks.
- Ocena
- 0 / 5
- Polubienia
- 5
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Standard Digital File License
Ledlenser Adapter – Compatible with H8R series headlamps for 3M M-Series Versaflo respirator masks (requires mining lamp bracket).
Important: Additional part required – 3M M-940 Mining Lamp Bracket Kit:
https://www.3m.com/3M/en_US/p/d/v101348121/
The design features a custom snap-on mechanism, providing a lower profile than the original 3M mining lamp bracket. Simply disassemble the original assembly and replace it with the bracket provided in the file, using the same fasteners. Optionally, you can secure the snap-on clip to the body with an M3 bolt and nut.
A snap-on clip for the lamp battery is also provided, which can be simply glued or secured with double-sided tape behind the mask.
If you prefer to use the taller 3M mining lamp bracket system, check out my other files in my profile. Due to Printables Store upload limits for new users, I cannot upload all four files at this time. Please contact me directly through my profile.
Print instructions:
- Recommended Material: PETG
- Infill: 30%, Gyroid pattern
- Supports: Standard (only needed as imagined below)
- Orientation: Print as oriented in the file
