Roborock Q7/S7 Bottom Brush Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roborock Q7 Max+ Bottom Brush Cover.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello all,
I created this model for my Roborock Q7 Max+, which broke.
1. Disassembly of existing cover
To replace the original cover, you will need to remove the 2 hooks with springs and the locking pin.
Unsrcrew the brushes and remove the locking pin for the spring hooks.
2. Reassambly of brushes and spring hooks
Those will have to be reassembled in the same spot as previously.
3. Printing paramaters
- Printed with tree supports in PLA (Bambu Lab Nardo Grey 11104)
4. Supported models:
- Roborock Q7
- Roborock Q7+
- Roborock Q7 Max
- Roborock Q7 Max+
- Roborock S7
- Roborock S7+
- Roborock S7 MaxV
- Roborock S7 MaxV Plus
- Roborock S7 MaxV Ultra
I did not add a feature to hold the rubber scraper, which works fine for me.
I highly encourage you to make some tweaks and additions to the design!
Please also let me know if this works for other Roborock models, so I can add them to the supported vacuum robots.
Enjoy!