Liczymy pasujące modele…
This is a short version of universal vaccum nozzles. 35mm tube diameter,61mm tip and 15cm total length. Ideal for strict location in car cleaning like under the seats. Tested with ASA, bed preheat at 100celcius nozzle temp 250c NO FANS 0%…
Dimensions : Height - 170mm End piece - 8mm x 18mm Base cone diameter - 36 to 32mm
The small piece replaces the white plastic part that the hose is glued to. Big piece is the Camlock nozzle. Put the original locking part over the Camlock adaptor and then glue on the small piece with epoxy. Notches are to make unlocking…
Get into hard to reach places with this attachment. Made for my miele vacuum but sure it can work for others. No support needed. Made to get into the lint trap of my washer/dryer combo between loads but sure it can be used for other use…
Handschleifer mit Staubabsaugadapter Für Schlauch Innen-Ø 25-mm Außen-Ø 33-mm Anschluss für Festool Anschlussmuffe oder mit angepassten superschnellen Schnellwechselsystem für Staubsaugeranschlüsse mit 2x 10x2 Magnete von Peter H +…
Set of 4 wedges for the IKEA POANG child seat, so that the vaccum robot (in my case a Roborock S7) don't try to climb on it. I used double face tape to attach them.
Replacement whell for vacuum cleaner AEG vx6 x force
Summary 16mm high threshold designed for the irobot i8+. Parametric design. Change either [Length, Depth, Height] in fusion file. For my threshold i printed 3 long pieces [L=200mm,h=16,d=35] and 1 end piece [155mm]. 4 different lengths on…
I needed a holder for my Vacuboy in the cell culture. This holds the Pasteur pipette vertically onto the walls of the hood, away from my area when I do other work. I printed with PLA and 20% infill. It is also fine with bacilli…
Ramp for enabling vacuum robots to climb small steps. It works well for a Roborock Qrevo but it should work for any model with LIDAR navigation. Just set up the virtual walls around the ramp and the robot should use the ramp. You need to…
This is a simple adapter to allow the connection of a 35mm standard vaccum hose to the plastic dust collector of a Makita Router/Trimmer RT0700. Can be printed from PLA, ABS or PETG For more Information please visit:…
made this simple model to clean the hole around spark plugs or glow plugs before removing them so you dont get dirt into your engine. also usefull to clean tight gaps in the interior or engine bay
Adaptable sur tout les aspirateurs Mac Allister. Autres Marques à Mesurer et confirmer Diamètre côté aspirateur 80.0mm Diamètre Coté Tube 40.0 mm Adaptable to all Mac Allister vacuum cleaners. Other Brands to Measure and Confirm Vacuum…
Karcher WD6P Vaccum Cleaner connection Tool pipe length : 20mm Diameter : 30 to 39mm (On STEP file per diameter) + 22 + 44 Freecad source file in attachement Print it in PLA
I remixed the osvac F32-H32 thing to adapt to my Starmix SG8 vaccum cleaner. Settings are for PETG from manufacturer Material for Print. The attached gcode is for a 0.6mm nozzle. The model will be printable with a 0.4mm nozzle too but…
This model help to support mini vacuum pump on the ground. It requires M1.5x 5 screw Please "like" and “comment” on the comment section if you like this design.
Do you keep your filament in vacuum sealed bags, but struggle to maintain a flat surface when using the pump when removing the air from the bag? This is a simple riser which is half as tall as a 1KG spool of filament, which you can place…
I printed this model for collecting debris from Bosch 1617, but it looks like my vaccum hose is not a standard 1.25inch – https://www.printables.com/model/548380-bosch-1617-fixed-base-dust-collection-adapter-125- I created this adapter.…
Vaccum Nozzle with a 33.65mm OD and a height of around 200mm Printed upright with 2 or more walls, 15% or more infill Printed with PETG, or any filament available Added the f3d file for alterations
I designed this because my car was flooded. The mounting part made by Ficik is great design, also really easy to print. I sugest printing it in transparent filament, to know when watter is sucked out of carpet. No supports needed.
Useful little vacc to clean your keyboad and computer desk. Designed a wall mount so it hangs around your desk and doesn't get lost. Printed PETG HF but PLA would be great too for indoor applications. no supports needed. X1C takes about…
My button broke, so i printed this replacement. Fits perfectly. Printed in Prusament PETG on PrusaMini+ w/ support
This is just another nozzle for a vaccumcleaner. Nothing spcial about it. Measurements are nicludet in on of the pictures. If need to make an change, I included the .step and .f3d. UPDATE: I forogot to mention that the .f3d is somewhat…
This is a material storage organizer for the small vacuum former JT-18 and JG-08 (both small dental vaccum formers). The Inner dimension of the container is 130 x 130 mm that fit the material size used for these vacuum formers (Material…
Here you can download an adapter for the Parkside PWD 30 A1 vacuum cleaner for the osVAC(neo) system. It is based on the model from @d0b_58654 and should therefore also fit the Parkside PWD 30 B1 (and maybe others). However, since it is…
Need to keep your nozzles near your Rowenta vaccum cleaner? Look no further. This design is meant for the Silence Force - Cyclonic, model RO7253EA, type RO72OE0.
Added a .step file for modifying the dust port to your own dust collection system.
The clip form George is great and I use it every day, so I was keen to improve it further. The weight has been reduced to 0,35g and a clamping mechanism added that doesn't deform the filament. The clip is ideal for vacuum bags. The…
Design inclueds 3 parts, button and gasket should be printed separately. Main body should be printed without supports, gasket should be printed with soft TPU. After print use small knife to cut included supports that are supporting button…
Wanna hang a picture? But don't like the dust tickeling down on your sofas? This adapter for your vacuum will stick to the wall by the mighty vacuum force and suck away all the dust where it is produced. As long as it is an Elektrolux…
This Adapter connects your vaccum cleaner to your power tool dust extraction port, if you have a standart shop vac with 35mm diameter hose and a power tool with 27.5mm dust port... Notice the fancy ribs on the outside! Is it for strength?…
i made an adapter to fit the m18 orbital sander vaccum attachment to work with the milwaukee m18 2 Gallon wet dry vaccum. the end of the hose didnt fit snuggly in the sanders vaccumm attachment. im including the fusion file aswell as a…
holds the vacuum on the pegboard (non-affiliate) https://www.amazon.com/dp/B0DHWRRTCJ?ref=ppx_yo2ov_dt_b_fed_asin_title
Wanted a way for my toddler to be able to put away his toy vacuum after he is done playing. Needless to say, Mom and Dad put away the vacuum more than he does, but it's useful and keeps the toy off the ground. Mounted to the side of a…
I had some trouble placing and using the pump included in some filament vaccum bags (e.g. https://www.3djake.com/3djake/vacuum-set-including-pump ). When you use the pump to have to apply some pressure on the pump, so that it's sitting…
Drilling the wall and want to keep it clean, Sure! but what about the ceiling? the worst thing is a face full of dust from drilling. No more! This attachment allows the hose to go near horizontal or vertical and has enough holding power…
A wall mount for two accessories, designed similarly to the original.
This is a very simple model I made in less than 10 seconds. My old vacuum cleaner uses bags that connect to the hose attachment with a rubber lip. When attached this lip does not have a great seal unless pulled up onto the connector. it…
Print it vertically, using PETG for more resistance. Use organic support, no brim required. Slow down printing speed eventually (depending mainly on your printer etc…)
The Ultimate Vacuum Bag Air Disc—Fast, Simple, and Effective! Tired of struggling to get your vacuum pump started on a flat surface when storing filament in vacuum bags? I’ve tried other solutions, but none quite did the trick—so I…
Case for vacuum pump. With internal storage in lid. Print it in PETG or PLA or filament of your choice with 0.2 layer height. No supports needed.
And another air disc so that the vacuum bag can be pumped empty more quickly.
For storing my filaments I use the vaccum bags and therefore I need air dics. After stumbling on https://www.printables.com/model/1325723-the-best-vaccum-bag-air-disc-ever I printed quite a few of them. The name is really no exageartion.…
Customized version of https://www.thingiverse.com/thing:1571860 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1571860
Created a version of the original made by Jan Ruth, adapted for generic portable vacuum cleaners found in Aliexpress
We got one of the budget floor vacuum robots (Laresar Clean Evol 3s). It works pretty well so far but is just short enough to get stuck under the couch. I looked for something like this but most were for the roomba’s. The front bumper…
I used PLA on my Elegoo Centuri Carbon There are insurts for pushpins, but I'm sure you can use screws for it. First ever 3d model I made!
Robot Vaccum Brush Cleaner. (Edited 7.Sept.25) Effective design. Uses a blade section of your utility knife. V1 suits blades 21.0 x 8.7 x 0.5 mm CombBrushCleaner version added with slimmer design and comb for extra functionality Printing…
About An adapter for connecting vaccum hose to hand held Dyson vacuum. Assumes hose with 43 mm outer diameter and counter clock wise thread with 6 mm pitch. No idea if this is in any way standard, it was just the hose I had :-) the thread…
Cube Cover for Zwilling Fresh & Save vaccum box “2S”. This suits the “2S” version. With the included openSCAD file, you can easily generate covers for the other square “S” sizes. The rectangular “M” or “L” versions should be possible, but…
A super cute ears, tail, paws, ramp, and bonus sleeping Umbreon Kit for almost any robot vaccume, use double sided tape!
Eyes and mustache face to glue onto your robotic vaccum. I reccomend using velcro to avoid damaging your vaccum.
Toy knife you can glue onto your robot vacuum. This is a toy, but please be careful. I recommend using Sellys plastic glue to attach it to the side of your new serial ankle killer. (The 4th photo is not real.)
This 3D model represents a small turbine-like fan motor that is driven by the airflow from a vacuum cleaner. The central
Vaccum hose adapter to fit a regular round vaccum nozzle to fit Bocsh miter saw. My vaccum nozzle is 31.8 mm, and the hole is ever so slightly tapered for a snug fit. Green piece in PLA, managed to break the tabs on that. I printed with 3…
I broke the 20 year old clip on the firewall that keeps the throttle body vacuum line from moving around and smacking into stuff. Modeled this clip that fits in the same spot. It should fit as a replacement for other similar clips on the…
This innovative vacuum cleaner attachment was specially developed for the effective cleaning of oil burner chambers with different fins. To achieve optimal results, you should individually adapt the attachment to each combustion chamber…
Adapter to plug Wuerth vaccum hose (ISS / TSS / HWS FLEXIBLE CLIPS 4M ISS 30-L/40-M/50-L Art. N° 0702400312 EAN 4056807807720) to Wuerth ETS-12-125-A Random Orbital Sander Strongly recommend to print in TPU , otherwise may be too tight a…
An adapter to connect a Wuerth vacuum hose ((ISS / TSS / HWS FLEXIBLE CLIPS 4M ISS 30-L/40-M/50-L Art. N° 0702400312 EAN 4056807807720)) to Arwin MM1510-C Sander I realize it an extremely niche use case for an old machine, but maybe it…
I only needed the bracket with a place for the flexible hose. I removed the bracket for the nozzle, I keep them separately
Ich habe ihn versuchsweise mit 5% Füllung und Standard-Einstellungen gedruckt. Und da dies schon einen sehr stabilen Eindruck macht, habe ich den Griff so verwendet. In die Löcher seitlich sind M4-Schrauben eingeschraubt.
After waiting months to receive my new ROIDMI NEX vacuum cleaner ... thats another story ;-) I didn't want to have all the accessories just lying around and so I designed the corresponding holders in Fusion360. You can use them to hang up…
This is a short version of universal vaccum nozzles. 35mm tube diameter,61mm tip and 15cm total length. Ideal for strict location in car cleaning like under the seats. Tested with ASA, bed preheat at 100celcius nozzle temp 250c NO FANS 0%…
This allow for you to use the larger 2 1/4 vacuum nozzles on the smaller 1 7/8 hose. they fit inside the nozzles and allow you to quickly swap from nozzle to nozzle with out having to change out the adapter. they can also be stored right…
Dimensions : Height - 170mm End piece - 8mm x 18mm Base cone diameter - 36 to 32mm
A short yet wide tool for the Ryobi PCL702 hand vaccum. This one fits the vaccum perfectly and does not leak like some other tools for this vaccum. I printed in transpartnet PLA and it has held up great for months of use. If printing in…
Best printed with PETG-CF, 0.2mm layer, with supports only on the clip part.
The small piece replaces the white plastic part that the hose is glued to. Big piece is the Camlock nozzle. Put the original locking part over the Camlock adaptor and then glue on the small piece with epoxy. Notches are to make unlocking…
Get into hard to reach places with this attachment. Made for my miele vacuum but sure it can work for others. No support needed. Made to get into the lint trap of my washer/dryer combo between loads but sure it can be used for other use…
Handschleifer mit Staubabsaugadapter Für Schlauch Innen-Ø 25-mm Außen-Ø 33-mm Anschluss für Festool Anschlussmuffe oder mit angepassten superschnellen Schnellwechselsystem für Staubsaugeranschlüsse mit 2x 10x2 Magnete von Peter H +…
❤ If you like this model, drop a like to support my 3D printing addiction (er... I mean hobby)! A flat adapter for upholstery and car vacuuming. Fits Bosch Readyy'y. Uses floano's interface for the Bosh Readyy'y. Many thanks. You can use…
❤ If you like this model, drop a like to support my 3D printing addiction (er... I mean hobby)! A flat adapter for vaccum bags. Fits Bosch Readyy'y. Uses floano's interface for the Bosh Readyy'y. Many thanks. You can use my own original…
This is a recreated plastic hot water sensor housing of the dock of the xiaomi x20 max vacuum cleaner. This part originally is known to be brittle and break very easily, culminating in water splashing inside the dock and burning various…
Different door ramps i've made for my home. might work for you. Fusion files included if you need to change anything.
lost my dust extractor hose adapter for my m18 sander so I remixed this one
stronger and more reliable drop in replacement valve for common lego vaccum engine desigs
Adapts the blower end of the Fanttik Slim-V8 to be able to use vaccum accesories, like the hose extension.
j'ai réduit le jeu au niveau de l'axe et l'écrouèrent est rallonger pour un meilleur maintient . n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir ! Bon print !
Absaugadapter von Makita Handkreissäge zu Festool Staubsauger festool vac FT-CT15E to Makita BSS610
Recommended print settings: Layer Height: 2mm Supports: disabled Walls: 5 Infill: 30% Gyroid Material: PLA/PETG Infill shouldn't matter too much as the model is only 1.7mm thick. I would recommend to start with PLA if you need a stronger…
Vacuum Cleaner Arm for HiKOKI Vacuum Cleaner This adjustable vacuum arm keeps the hose above your workbench, so it no longer gets in the way while you work. The arm swivels smoothly and reduces hose resistance, providing greater freedom…
Add a skirt if you have problems keeping it on the bed. Can be scaled up if you wish. i print it at 101% in ABS
Mit diesem Modell kann man hervorragend Bereiche mit kleinen Gegenständen absaugen und sauber halten. Das Besondere ist, dass sich die „Finger“ frei bewegen können und so in jede noch so kleine Ecke kommen. Ob nun Muttern und Schrauben,…
Appartenly original hinge for vacuum unit gets broken quite often. I designed a part that clips on and has a slot to be secured with zip-tie (I added some 2sided tape on the inside of the part and ziptied it - it is as fixed as it can…
The adapter is printed with PETG and do not need supports.
This is a adapater for vaccum pods from the Biesse Rover A3 CNC machine. With this adapater you can make your own holding devises or vaccum pods. Print Settings Printer: Cetus3D MK3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2…
A simple comb to clean out the filter! Category: Hand Tools
écrou pour réduire l'énorme jeu avec le manche intex qui est fourni avec
Hi, this is a prototype of a vacuum robot gripper that creates its own vaccum using the venturi effect . It weighs around 6 g and can lift things up to 1.5 g (I just blew into the air intake) EDIT: @DickF tested it and was able to lift…
This is an accessory (additional brushes) etc. holder for the Xiaomi Dreame V9 vaccum cleaner. (It possibly also fits to V9P and V10, but I cannot verify). As I think the original charging cradle does not provide enough slots, I designed…
I have a Shark IQ (vacuum robot) and it's always trying to climb the legs of a bike stand (Delta Michelangelo Canaletto), so I made this snap-on stopper. It's 42mm tall and the slot is 29mm (diameter). It's easy to print and install. NO…
A maker friend of mine needed an Aspirator for a lab experiment he was conducting, and I did not have one to lend him, so instead, I just designed one and printed it. I have not done any extensive performance testing on it, but it worked…
I use this vacuum cleaner to remove spiders and cobwebs. Because I do not trust the rubber flap in the vacuum cleaner properly, I needed a plug for it. For this plug I printed an appropriate holder. I copy the original nozzle holder as…
German: Dies ist die neue Version des bei mir seit einem Jahr sehr bewehrten selbstansaugenden Absaugaufsatz für das Bohren in Beton- oder Ziegelwänden im Wohnbereich für das Bosch-Professional click and clean System oder das Kärcher C35…
![Subtle robot vaccum ramp - door threshold [modular/parametric]](https://media.printables.com/media/prints/1054336/images/7988043_595e089c-e46a-443b-86ec-cab9e5886972_1e4e588c-0f53-45dd-92a9-8aadcefec208/20241025_220955.jpg)
