187 models
found on thingiverse print settings: Prusa mini+ No Rafts No Supports Resolution: 0.2 Infill 15% Prusa PETG
Print approx. €3.05–€3.73 excl. taxPreliminary estimate for PETGSource material: PET
Yet another set of vacuum nozzles for 35mm adapters (most common in Europe) as I couldn't find suitable models on Thingiverse. Number one is a " Desk Cleaner ", i.e. it was designed to remove dust from areas where a normal vacuum nozzle…
And another air disc so that the vacuum bag can be pumped empty more quickly.
The Ultimate Vacuum Bag Air Disc—Fast, Simple, and Effective! Tired of struggling to get your vacuum pump started on a flat surface when storing filament in vacuum bags? I’ve tried other solutions, but none quite did the trick—so I…
A maker friend of mine needed an Aspirator for a lab experiment he was conducting, and I did not have one to lend him, so instead, I just designed one and printed it. I have not done any extensive performance testing on it, but it worked…
My button broke, so i printed this replacement. Fits perfectly. Printed in Prusament PETG on PrusaMini+ w/ support
German: Dies ist die neue Version des bei mir seit einem Jahr sehr bewehrten selbstansaugenden Absaugaufsatz für das Bohren in Beton- oder Ziegelwänden im Wohnbereich für das Bosch-Professional click and clean System oder das Kärcher C35…
vacuum pads, m6 threads need to be cut for PC4-M6 connectors i use this seal: https://www.amazon.de/-/en/gp/product/B09
General Information: A hand sanding tool for 150mm sanding discs and sanding grids with an optional vacuum adapter for dust extraction e.g. for woodworking or drywall works. Usable for 150mm sanding discs or grids I used 20mm…
Uses 2 pieces of ½" hose that pushes into the adapters. They are both fitting into the adapter therefor maximizing the flow and not restricting it like conventional adapters that make the hose to go over them thus making cross section…
Wanna hang a picture? But don't like the dust tickeling down on your sofas? This adapter for your vacuum will stick to the wall by the mighty vacuum force and suck away all the dust where it is produced. As long as it is an Elektrolux…
This is just another nozzle for a vaccumcleaner. Nothing spcial about it. Measurements are nicludet in on of the pictures. If need to make an change, I included the .step and .f3d. UPDATE: I forogot to mention that the .f3d is somewhat…
I had some trouble placing and using the pump included in some filament vaccum bags (e.g. https://www.3djake.com/3djake/vacuum-set-including-pump ). When you use the pump to have to apply some pressure on the pump, so that it's sitting…
I needed an adapter to plug this sanding machine to my vaccum (35 mm). It was a little bit tricky to adjust it perfectly. It fit just a little tight to the machine so it won't move when we use it. It's not the best design i've ever made…
This is an accessory (additional brushes) etc. holder for the Xiaomi Dreame V9 vaccum cleaner. (It possibly also fits to V9P and V10, but I cannot verify). As I think the original charging cradle does not provide enough slots, I designed…
Vaccum cleaner adapter Karcher for small place, ideal for cleaning car.
print with 4 walls, 25% infill, any filament IF YOU LIKE MY WORK, BUY ME DRINK - https://ko-fi.com/alexvikingo
I designed this because my car was flooded. The mounting part made by Ficik is great design, also really easy to print. I sugest printing it in transparent filament, to know when watter is sucked out of carpet. No supports needed.
The adapter is printed with PETG and do not need supports.
Hi, this is a prototype of a vacuum robot gripper that creates its own vaccum using the venturi effect . It weighs around 6 g and can lift things up to 1.5 g (I just blew into the air intake) EDIT: @DickF tested it and was able to lift…
Here you can download an adapter for the Parkside PWD 30 A1 vacuum cleaner for the osVAC(neo) system. It is based on the model from @d0b_58654 and should therefore also fit the Parkside PWD 30 B1 (and maybe others). However, since it is…
Vaccum nozzle with 32mm outer diameter. Print Settings Rafts: No Supports: No Resolution: 0.28 Infill: 20% Category: 3D Printer Parts
This is a simple adapter to allow the connection of a 35mm standard vaccum hose to the plastic dust collector of a Makita Router/Trimmer RT0700. Can be printed from PLA, ABS or PETG For more Information please visit:…
Summary 16mm high threshold designed for the irobot i8+. Parametric design. Change either [Length, Depth, Height] in fusion file. For my threshold i printed 3 long pieces [L=200mm,h=16,d=35] and 1 end piece [155mm]. 4 different lengths on…
Use the bracket on its own for wall mounting or also print the cable holder, so you dont have to think about plugging the vaccum in to charge it. The parts have a registration feature so no measuring required, just a drop of glue (I used…
Add a skirt if you have problems keeping it on the bed. Can be scaled up if you wish. i print it at 101% in ABS
I made this holder for my hand vaccum cleaner. Maybe you have the same one :)
This model allows for easy customization of EVERYTHING: wall thickness choice of I/D or O/D for each end diameter for each end (accepts mm or inches) length for each end (accepts mm or inches) taper for each end (including zero) overhang…
Cable clip to hold your power cord onto the vaccun hose. Clip can be easly snapped on and off. The nose feature snaps into the grooves of the vaccum hose tor prevent a sliding of the clip on the hose. 135 is the opening angle of the clip.…
Sometimes size simply does matter. Especially when you are trying to vacuum you cars interior and have to get into those very slim and deep spaces between the front seats and the power train tunnel. Of course vacuum cleaners come with a…
Vaccum hose adapter 1-7/8in to 2-1/2in for shopvac
1.25" vaccum adapter for Dewalt table saw.
Ridgid Trim Router Vaccume Adapter
A simple comb to clean out the filter! Category: Hand Tools
Its printed in ASA, 0.6 nozzle, 0.4 layer, 3 perimeters, 6mm+ brim, NO cooling, printer inside cardboard “chamber” Ridges on surface are not for looks. They significantly reduce warping. Without them print warped badly and delaminated in…
This vacuum cleaner adapter can be used for vaccum bags. In this bags I store my Filaments, of course other this can be stored too. Update: V1 has a 9mm hole V2 has a 5mm hole Freecad file is added, feel free to customize. The adapter…
just a nozzle cause vaccum cleaners suck ;)
A quick lock vacuum system to connect your 38 mm hose to woodworking machines.
Replacement for my pool vaccum pole adapter. Heavy-duty vs original. part: Solstice by International Leisure Products Swimline Hydro Tools 8145 Print Settings Rafts: No Supports: Yes Infill: 20 Filament: Generic PETG Category: Outdoor &…
Adapter for 50mm PVC-Tubing to 40mm vaccum-cleaner hose.
Using a common vacuum cleaner to evacuate air form a storage bag is not a new idea. But dealing with fresh food, the nozzle needs to be hygienically clean in order not to pollute the food. I read that both PLA and PETG are food safe in…
This is a accessory holder for the Xiaomi Mi G10 vaccum cleaner. I used Prusament PETG Signal White with: 0.16mm resolution 30% infill
Ramp for enabling vacuum robots to climb small steps. It works well for a Roborock Qrevo but it should work for any model with LIDAR navigation. Just set up the virtual walls around the ramp and the robot should use the ramp. You need to…
After modifying and printing https://www.printables.com/model/251018-ryobi-random-orbit-sander-r18ros-expanded-dust-por I figured out that I don't have the R18ROS but the RROS18 from Ryobi. Even it looks like a small difference… it's a…
I use these parts for hose management between my Festool CTM Midi cleaner and MPCNC Primo. Parts are simple but works really well. The edges are rounded to prevent any damages. Fits Festool D27/32x3,5m-AS/CTR vaccum Hose WITH attached…
Adapter to use the Eibos electric pump on the eSun vacuum bags, also acts as a suction aid to separate the valve from sticking the bottom of the bag for easier suction. How to use: Place the adapter inside the bag below the valve (round…
Added a .step file for modifying the dust port to your own dust collection system.
Just a simple holder for vacuum cleaner tools Category: Household Supplies
The clip form George is great and I use it every day, so I was keen to improve it further. The weight has been reduced to 0,35g and a clamping mechanism added that doesn't deform the filament. The clip is ideal for vacuum bags. The…
Design inclueds 3 parts, button and gasket should be printed separately. Main body should be printed without supports, gasket should be printed with soft TPU. After print use small knife to cut included supports that are supporting button…
Skadis Holder to hold Hoto Air Duster & Vaccum Nozzle Kits
!!!Überdruckventil dringend empfohlen!!! !!!Overpressure Valve highly recommended!!! TPU, 100% Infill
Clothes in dirty, clothes out dry and clean, guilt free The AEG Ökokombi Washer/Dryer machine is truly a unique, absolutely wonderful device: Literally no one else was crazy enough to cram a full washer and a full heat pump dryer into one…
Attachment holders with mounting holes for Milwaukee, Henry HVR160, and Shark IONFlex Vaccums
Our Grundig vaccum didn't have an upholstery nozzle, so I created this quick-and-dirty OpenSCAD mashup of https://www.thingiverse.com/thing:3846270 by innif and https://www.thingiverse.com/thing:1763542 by cyril50 . Works nicely to clean…
Since my original part got lost, i designed my own. Printed in PETG Layer 0.20 mm NO supports, my need some brim
I remixed the osvac F32-H32 thing to adapt to my Starmix SG8 vaccum cleaner. Settings are for PETG from manufacturer Material for Print. The attached gcode is for a 0.6mm nozzle. The model will be printable with a 0.4mm nozzle too but…
After waiting months to receive my new ROIDMI NEX vacuum cleaner ... thats another story ;-) I didn't want to have all the accessories just lying around and so I designed the corresponding holders in Fusion360. You can use them to hang up…
Vacuum adapter for the BOSCH GAS35 for the Scheppach HMS860
Tool hanger for Bissel Vaccum Download the file for STL Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.25mm Infill: 20% Filament: Prusa PLA Category: Household
Adapter for aliexpress vaccum bag and portable air/vaccum pump from aliexpress. The thread is M26x1.5 in Fusion360. The diameter from the fitting is 23,8mm and a wall thickness of 1.8mm. I added the .step for remixing! Printed it from the…
The model fulfills the same purpose as the original part. You can easily see how it is used in the photos. It consists of two parts that are simply screwed together. You need the following screws and nuts to mount the two parts together.…
PL Model uchwytu do akcesoriów odkurzacze Dreame Xiaomi T10 20 Kompatybilny z innymi modelami tego producenta Uchwyt do montażu na ścianie / płycie. Odsuniety od ściany w celu łatwego montażu rury z założoną szczotką. Dedykowane miejsce…
These are 2 parts used to create a hanger on the wall for parkside original vaccum cleaner. Please print them verticaly for a stong end piece
Hi! Here we have my first TinkerCAD attempt an making a small aquarium syphon (hence the edges). If you've never used one before, its super simple. The air bubbles created by the stone create suction. This pulls up the debris (doo-doo)…
This is a recreated plastic hot water sensor housing of the dock of the xiaomi x20 max vacuum cleaner. This part originally is known to be brittle and break very easily, culminating in water splashing inside the dock and burning various…
Kärcher vaccum cleaner connection best made in soft TPU, so you are able to connect the different 3D printed nozzles wherever you want. Dimensions 35mm file: long side ID 30mm short side ID 35mm UPDATE: added a slimmer version, pls check…
This may not be model for general use, I share it here so that I have a backup copy. I have manual pool vacuum cleaner that is suited for 38mm hoses, but I have only 32mm hoses at home. Adapters and hoses are not cheap, so I made myself…
Robot Vaccum Brush Cleaner. (Edited 7.Sept.25) Effective design. Uses a blade section of your utility knife. V1 suits blades 21.0 x 8.7 x 0.5 mm CombBrushCleaner version added with slimmer design and comb for extra functionality Printing…
Similar to original just smaller diameter holders
Do you keep your filament in vacuum sealed bags, but struggle to maintain a flat surface when using the pump when removing the air from the bag? This is a simple riser which is half as tall as a 1KG spool of filament, which you can place…
Useful little vacc to clean your keyboad and computer desk. Designed a wall mount so it hangs around your desk and doesn't get lost. Printed PETG HF but PLA would be great too for indoor applications. no supports needed. X1C takes about…
Better adapter for Mayku Formbox. The original one did not provide sufficient seal. This one is for 35 mm hose, but you can adjust the diameter in the .f3d file, or in the step file. . We printed this with 95A TPU. It shouldn´t matter…
Repair part for car vaccum pump OEM 8E0927317. Print Settings Brim: No Supports: No Infill: 20 Filament: Any PETG Layer Height: 0.15mm
Vaccum Nozzle with a 33.65mm OD and a height of around 200mm Printed upright with 2 or more walls, 15% or more infill Printed with PETG, or any filament available Added the f3d file for alterations
you put vaccum cleaner on one side and turbine spins very fast
Vaccum adaptor, this an adaptor for vaccum cleaner nozzle of D27 mm to ESUN's vaccum bags for filament
The base used is the XRP Robotics chasis (Entry for the competetion), and has 2 main modules, the dirt centralisation and dirt collection. The brushes for the first and roller for the Latter are to be printed in TPU and everything else in…
Simple angle nozzle for eureka vaccum Printed with Kobra 2 pro at 0.3mm height 15% infill Use a large brim if you print it its a tall narrow print and it can tilt easily
Need to keep your nozzles near your Rowenta vaccum cleaner? Look no further. This design is meant for the Silence Force - Cyclonic, model RO7253EA, type RO72OE0.
I design an adapter to a rear part of a vacuum to turn into into an effective blower. This is an early version with a room for improvement. I originally printed parts from TPU and PETG. “bottom” part is made from TPU so to not scratch…
I broke the 20 year old clip on the firewall that keeps the throttle body vacuum line from moving around and smacking into stuff. Modeled this clip that fits in the same spot. It should fit as a replacement for other similar clips on the…
écrou pour réduire l'énorme jeu avec le manche intex qui est fourni avec
Two set of nozzles for the Tristar made handheld vacuum clear from Aldi
This is a nozzle for the handvacuum QUIGG MD19458H sold by Aldi. The vacuum has a pretty shitty shaped nozzle and this model improves the situation. Print upright with a brim.
I needed a holder for my Vacuboy in the cell culture. This holds the Pasteur pipette vertically onto the walls of the hood, away from my area when I do other work. I printed with PLA and 20% infill. It is also fine with bacilli…
A wall mount for two accessories, designed similarly to the original.
Mit diesem Modell kann man hervorragend Bereiche mit kleinen Gegenständen absaugen und sauber halten. Das Besondere ist, dass sich die „Finger“ frei bewegen können und so in jede noch so kleine Ecke kommen. Ob nun Muttern und Schrauben,…
Set of 4 wedges for the IKEA POANG child seat, so that the vaccum robot (in my case a Roborock S7) don't try to climb on it. I used double face tape to attach them.
This Adapter connects your vaccum cleaner to your power tool dust extraction port, if you have a standart shop vac with 35mm diameter hose and a power tool with 27.5mm dust port... Notice the fancy ribs on the outside! Is it for strength?…
stronger and more reliable drop in replacement valve for common lego vaccum engine desigs
This is basically an adjustable hole which lets you adjust the pressure by setting how much air leaks into the vacuum chamber/bag. I have combined this regulator with a fridge compressor and a vacuum gauge. This makes the setup as capable…
Hundai VC020 replacement part
I have a 12 years old vaccum cleaner and the clip used to lock the hood broke during my last used of it. The model is a copy of my RO8341 rowenta silence force vaccum cleaner. I think it will work for all reference under RO83xx. I printed…
Adapts the blower end of the Fanttik Slim-V8 to be able to use vaccum accesories, like the hose extension.
An adapter and example accessories for adapting the dysonv10 for 3d printed nozzles. Other models might be compatible. Printedable In PLA unless stated otherwise. The adapter doesnt need support, but will benefit from materials with…
About An adapter for connecting vaccum hose to hand held Dyson vacuum. Assumes hose with 43 mm outer diameter and counter clock wise thread with 6 mm pitch. No idea if this is in any way standard, it was just the hose I had :-) the thread…
![Subtle robot vaccum ramp - door threshold [modular/parametric]](https://media.printables.com/media/prints/1054336/images/7988043_595e089c-e46a-443b-86ec-cab9e5886972_1e4e588c-0f53-45dd-92a9-8aadcefec208/20241025_220955.jpg)
