DysonV10 vaccum to custom thread adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapter and example accessories for adapting the dysonv10 for 3d printed nozzles. Other models might be compatible.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Share Alike
An adapter and example accessories for adapting the dysonv10 for 3d printed nozzles. Other models might be compatible.
Printedable In PLA unless stated otherwise.
The adapter doesnt need support, but will benefit from materials with better layer adhesion, as it is a little fragile in PLA.
the nozzles can be printed in vase mode (I recommend thick walls) including the threads, but I have also hollowed out the threaded portion if you wanna print them as initial bottom layers instead
For your own designs keep in mind that you cant make them too wide and need to properly brace their sides to balance out the suction in you make them very thin.
Im afraid my threads aren't any particular standard, as I prioritized printability when making them, feel free to just use the provided example instead.