osVAC(neo) Adapter for Parkside PWD 30A1 Vaccum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
osVAC(neo) Vacuumadapter for Parkside and maybe other Vacs. Added V3 Version with SlipRing.
- Ocena
- 4 / 5
- Polubienia
- 32
- Pobrania
- 228
- Wydruki
- 2
- Wyświetlenia
- 1186
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Here you can download an adapter for the Parkside PWD 30 A1 vacuum cleaner for the osVAC(neo) system.
It is based on the model from @d0b_58654 and should therefore also fit the Parkside PWD 30 B1 (and maybe others).
However, since it is more logical for me to mount a female adapter on the suction side, I have adapted it accordingly.
As the vacuum cleaner is produced by Grizzly, the adapter could also fit other workshop vacuum cleaners.
Edit:
I have added the SlipRing in the V3 STL-File so that the hose does not twist as much or at all. However, I have not yet tested this.
==========
Hier könnt ihr einen Adapter für den Staubsauger von Parkside PWD 30 A1 für das osVAC(neo) System herunterladen.
Er basiert auf dem Modell von @d0b_58654 und sollte daher auch beim Parkside PWD 30 B1 (und vielleicht auch andere) passen.
Da es für mich jedoch logischer ist, das ein weiblicher Adapter auf die Saugseite montiert wird, habe ich dieses entsprechend angepasst.
Da der Sauger von der Firma Grizzly produziert wird, könnte der Adapter auch an andere Werkstattsauger passen.
Edit:
In der Version 3 (STL-Datei) habe ich den SlipRing hinzugefügt, damit der Absaugschlauch sich weniger bis gar nicht mehr verdreht. Allerdings wurde dieser von mir noch nicht getestet!