406 modeli
F32H32. Is smaller than osVAC-original. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
Thanks for Hobbyhimmel for inventing this system: https://www.ossso.de/osvac/
Passend zum osVAC System hier ein (Geräte-) Adapter M32 auf DN50 (z.B. HT-Rohr) mit 50mm. Ich verwende diesen Adapter um schnell und einfach einen (zusätzlichen) Zyklon in meiner Absaugung zu installieren. Hierzu habe ich den DN50…
Link zum OSVac System: https://ossso.de/osvac/ Adapter für die Tischkreissäge DeWalt DWE 7492 um diese mit dem OSVac System zu verbinden. An dem Adapter wird auch gleich die Absaugung für die obere Abdeckung angeschlossen. Druckdaten:…
I integrated a slip ring into M32H32. Ich habe in den M32H32 einen Drehring eingebaut. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis…
This is an osVAC neo F32 to H32 adapter for Kärcher (and other) hoses with 32mm inner diameter. osVACneo-H32F32-02 works best for 0.4 nozzles at 0.2mm layer height osVACneo-H32F32-03 works best for 0.6 nozzle at 0.3mm layer height If you…
osVAC conversion adapters for Dust Commander cyclone dust separator. With these adapters you can attach osVAC hoses directly to the Dust Commander. Also check out my osVAC pressure relief valve adapter. The female connector uses my osVAC…
Attachment for an makita angle grinder for dust free sanding with diamond sanding wheels with an osVAC connector
For discussions about osVAC neo, you may go to the forum: Informationen und Diskussionen bzgl. osVAC neo findest du im Forum: https://www.woodworker.de/forum/forums/3d-druck.47/ I did bring osVAC to Fusion 360. The link to the latest…
If your slip ring will not rotate, here is help for you. Please read attached Word-document. from Page 17 on. Wenn sich der slip ring sich nicht drehen läßt, hier ist Hilfe. Bitte das angehängte Word-Dokument ab Seite 17 lesen. I did…
Passend zum osVAC System hier ein Adapter F32 auf (Außen-)Durchmesser von 50mm. Da ich in meiner Werkstatt eine Absaugung mit HT-Rohr (DN=50mm) verbaut habe wurde dieser Adapter konzipiert. Damit habe ich die Möglichkeit einen F32…
This Adapter is made for a vacuum hose with an inside diameter of 32mm, outside diameter 38mm to the male part of the osVac System. Every hose between 36-40 outside diameter should work, I use this vacuum hose from Amazon:…
If you like the Design leave a like and show some Love ;-) I remixed Thing 4581505 to fit for OSVAC and gave more volume to enable more Dust to pass through. Print Settings Rafts: Doesn't Matter Supports: Yes Resolution: 0,2 Filament:…
This is an osVAC adapter for festool "Tauchsäge TS 55". It may fit all other festool tools as well. For more information about osVAC see here: https://www.thingiverse.com/hobbyhimmel/collections/osvac-adapter Print Settings Printer Brand:…
Printing supports is recommended but not needed. Thanks to TOKENIZER for making osVAC neo. Thanks to the osVAC team at Hobbyhimmel .
Because the model of @Agar_146696 ( https://www.printables.com/de/model/68604-osvac-adapter-m32-dn50 ) was not long enough, I've designed this new version. Edit: After we've made aware by @Charly_Brown_539474 that the outer diameter was…
Adapters from 40 mm vacuum hose to male and female 32 mm osVac. I've only tested the female one so far. I used the Fusion 360 project provided by odul from the woodworker.de forum and changed the hose diameter to 40mm. Worked first try in…
I designed an adaptor for my Festool TS55 to fit for OSVAC . I replaced the original one , so it fits perfect in the oroginal Systainer. I printed in PETG . 03 resolution . online Perimeters no infill for extra strength.
Der Flansch Innendurchmesser ist 50mm. Ich nutze ihn an meinem Fräsanaschlag.
This is an osVAC neo M32 to H32 adapter for Kärcher (and other) hoses with 32mm inner diameter. osVACneo-H32M32-02 works best for 0.4 nozzles at 0.2mm layer height osVACneo-H32M32-03 works best for 0.6 nozzle at 0.3mm layer height If you…
Für meinen Werkstattsauger Parkside PPWD 30 B2 (auch für PPWD 30 A1) habe ich einen OSVac Adapter F32 für den originalen Anschlussstutzen erstellt. Gedruckt mit Sovol SV06 (Düse: 0,6mm / Layerhöhe: 0,2)…
osVAC Triton TRA001 / MOF001 Adapter
I bought a Kärcher suction hose extension and unfortunately it does not have a 32mm hose as the one that came with my Kärcher vacuum, but has an inner diametre of 35mm. So I created this F32 to H35 adapter. Hint: the first 5cm of the…
This is a osVAC M32 adapter for the Bosch GEX 12V-125 orbital sander. With the F32 counterpart for the original dust collector. There are 3 models: Bosch 12V M32.stl: the standard model. Bosch 12V M32 Tight.stl: a tighter version. For…
Drilling helper for hands-free dust extraction when drilling holes in walls or even ceilings. I had the predecessor version for about 5 years in use and loved it. Since I now change all my vacuum tools to use the universal osVAC…
Hello, If you like this Thing please leave a like and let me know :-) I remixed a Cyclone for the OSVAC System. Thanks to Hobbyhimmel for the great OSVAC Projekt. For the VAC i used a female adapter to easier Print, but you can place a…
An osVAC-compatible dust extractor which can be installed on a 20mm multifunction table (e.g. Festool or Wolfcraft MFT). I adopted the original design by ggragg to add an osVAC adapter. The 20mm mounts for the table are the orignal ones.…
Passend zum oSVAC System hier ein Adapter um 32mm Schläuche direkt an einem Bosch GAS, in meinem Fall den GAS 35 M AFC, anschließen zu können. Zur Abdichtung kann einfach eine 50mm Ring- oder Flachdichtung über den GAS Anschluß gestülpt…
osVAC Connector for my Makita MAKITA DHS680 (US: MAKITA XSH03). It is a remake/mix to fit Makita and the osVAC Connectors. Update 2022/05/29 V5 More Material for the screw, because i've cracked it after a few uses with a long hose of my…
osVAC Adapter for Bosch POF 1400 ACE
Nothing much to say. Got a used Festool OF 1010 Router and a running OsVac System in my Workshop. Here is my quick and dirty Adapter. Printed it with ABS, but i guess PLA is better as u see the “non flexible” Bending Areas on the Fotos.…
Created with the R-customizer for the osVAC system, this adapts my router (a clone of the Makita RT0700) to the osVAC system. I will probably shorten the exhaust of the router so the total length of the dust collector and the connector…
Slim Kärcher to osVAC Adapter. It uses my osVAC leak tight design, so you can insert a 37x32x2.5mm O-ring. If you don't have an O-ring at hand just leave it out, it will work as a regular osVAC coupling then. And the Kärcher vacuums have…
A pressure relief valve is a handy addon that prevents your cyclone dust extractor system from imploding or collapsing, if the hose is blocked e.g. by too much dust or debris. This is a mount for the pressure relief valve from Dust…
No 3d printer? You can buy this here: https://www.etsy.com/de/listing/4403675563/adapter-fur-bosch-gts-10-xc This is a remix of https://www.thingiverse.com/thing:4499325 with a male osVAC32 on the top. You can print this standing without…
Simple adapter to mount an F32 osVAC socket to the Makita DRT50 dust collection. It's printed in PLA, snuggly fits onto the dust collector. Print it with the M32 plug topside, then you sould not need any supports.
Basierend auf dem osVAC Female Adapter habe ich diesen mit dem Bosch Click & Clean (C&C) Adapter gemixed. Damit hat man beispielsweise die Möglichkeit eine osVAC Kupplung direkt an die originalen GAS C&C Schlauch anzubringen. Damit ist…
Simple nozzle for osVAC system Additional links: https://ossso.de/osvac/ Print Settings Due to the new Arachne generator i am printing all my parts with 0.60mm nozzle diameter, also possible with 0.4mm. Printer Brand: Prusa Printer: i3…
I was looking for an M32 adapter for the Mirka Deros - created from osVAC Neo Male and Mirka Deros Adapter as stated below. Thx for this great open-source vacuum system. Works like a charm and tolerances to the powercord of the sander are…
This osVAC adapter fits the Bosch 28mm dust extractor connection. Tested on my 12V circular saw and on the multi cutter (Stichsäge) and GEX random orbital sander. There are two versions of the adapter, a larger one where the osVAC…
Hose adapter for Einhell shop vacuum cleaner if you want to use separate hose other then the one supplyed from manufacturer. It has rotating hose base, the rotation will or will not work depending on your material and how dialed your…
Adapter to fit the Bosch Professional GCM8SJL to the osVAC platform. Remix of original Thing ID 3734911. Fitting to the osVAC M32 connector 4671596 and therefore can be used with the complete osVAC setup. To have smooth surfaces on both…
The adapter allows direct and secure connection of the standard festool d27 hose to the Osvac system. It uses the Festool bayonet lock to securely fix the hose. It has the standard osvac slip ring. In addition, a sealing ring is installed…
osVAC (neo) remix to create a 90 degree elbow coupling (M32-F32). Both ends have a slip ring (i.e., can be rotated 360 degrees) and can be connected to a female and male adapter, respectively. Printing worked fine when part was sliced…
F32 Adapter for the included braided hose of the Parkside Performance extractor
Here you can download an adapter for the Parkside PWD 30 A1 vacuum cleaner for the osVAC(neo) system. It is based on the model from @d0b_58654 and should therefore also fit the Parkside PWD 30 B1 (and maybe others). However, since it is…
M32 male adapter I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
osVAC neo M32 Staubsaugerdüse / Vacuum cleaner nozzle
Hi, I could not find the right version(s) for a kinda small footprint blast gate, so I modeled my own. You can mix and match the parts the way it fits your needs. You'll always need: 2 spacers 1 slide 2 baseplates Furthermore you need 6…
Passend zum osVAC System hier ein (Geräte-) Adapter M32 auf Innendurchmesser von 39mm, bzw. Außendurchmesser 44mm. Der Außendurchmesser verläuft leicht konisch auf 45mm an der Übergangsseite (für besserer Halt) Meine Bandsäge (Metabo BAS…
About the OsVac System: There are plenty adapters for different hoses and machines, osVAC means Universal Vacuum System. Why osVAC (Blog side in german): https://ossso.de/osvac/
This is a osVAC M32 adaptor for Makita SP6000 track saw vacuum cleaner outlet. The adaptor has a cone shape (starting at 35.4mm and ending with 35.6mm) so that is sits tight in the original adaptor. It can be use on other tools too as…
Passend zum osVAC System hier ein (ca. 75 Grad) Winkel mit M32 (Geräte-) Adapter auf F32 ("Base-Adapter"). Dieser Adapter findet an meiner Bosch GTS 635-216 Verwendung. Diese habe ich zum direkten Anschluss an das osVAC System umgerüstet…
I bought a Kärcher suction hose extension and unfortunately it does not have a 32mm hose as the one that came with my Kärcher vacuum, but has an inner diametre of 35mm. So I created this M32 to H35 adapter. Hint: the first 5cm of the…
Praktischer Adapter für den Makita Exzenterschleifer BO5041 auf das osVac Konzept.
osVAC neo adapter DN40 to M32 osVAC neo adapter DN40 to F32 DN is parameterizable (35 - 45) using Fusion 360 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 50% Filament:…
Wer, so wie ich, den Schlauch nicht von dem originalen Adapter lösen kann (ohne den Adapter kaputt zu machen), kann die beiden nutzen, um den Sauger mit einem osvac F32 Anschluss zu versorgen und den Schlauch ebenfalls. Ich habe die Teile…
An 120mm nozzle for osVAC mount. Prints without support.
osVAC neo adapter M32 to DN40 DN is parameterizable (35 - 45) using Fusion 360 Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: No Supports: No Resolution: 0.3 Infill: 50% Filament: Geeetech PETG white…
I finally decided to buy this little, high precise, expensive tablesaw and searched for an already available osVAC adapter, but all which i found for festool seemed unsuitable here (yes, i started to print some of them to test them with…
OsVac F32 auf HT Rohr 40mm
This is a 60 mm male adapter for the osVAC system by Hobbyhimmel. Weitere Links/Details: Allgemeine Infos zum osVAC System: https://ossso.de/osvac/ Weitere Adapter von Hobbyhimmel:…
Passend zum osVAC System hier ein (Geräte-) Adapter M32 auf (Innen-)Durchmesser von 44mm. Grundsätzlich auch mit Außendurchmesser 48mm verwendbar. Meine Kappsäge besitzt einen Absauganschluss mit Außendurchmesser von 44mm, zum Anschluss…
Adapter to fit the Bosch Professional GCM8SJL to the osVAC platform. Remix of original Thing ID 3734911. Fitting to the osVAC M32 connector 4671596 and therefore can be used with the complete osVAC setup. I printed it with PLA and it…
In meiner Werkstatt nutze ich eine Absauganlage, die ich mittels dem osVAC System an den Geräten anschließe. Grundsätzlich kann man eine Bosch GTS 635-216 auch mit einem Standard osVAC (F32) Maschinenadapter anschliessen. Da der Platz auf…
OsVac M32-Apdater für Bosch GTS 635-216 / OsVac M32-Apdater for Bosch GTS 635-216
An 80mm nozzle for osVAC mount. Prints without support.
I wanted to have a blast gate to which I can connect my suction hoses with the OSVAc system directly and expand the system as required. I need four extraction systems for my circular saw table with built-in milling cutter
Neuer Fräsanschlag, neuer Anschluss Für meinen neuen Fräsanschlag habe ich einen neuen Anschluss konstruiert. Der Flansch hat eine Kantenlänge von 70mm. Der Anschlag wurde aus 12mm Material gefertigt.
F32 female adapter I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
This is an osVAC adapter for the Metabo Planer DH330. The larger end has an inner diameter of 65.5 mm. Printed with 50% infill, a brim, and the large end touching the bed. ********************* Dies ist ein osVAC-Adapter für den Metabo…
Festool D27 DM-AS/CT and osVac Neo M32/M40 adapters to Bosch C35. I modeled the adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the adapter. OsVac M40 and Festool D27 combi-adapter…
VaCADapt is a fork of OSVac Vacuum adapter project. It's based on Fusion360 model with a lot of paramters to fit it to your hose and adapter requirements. When I write H40 this means, Hose 40mm outer diameter of the hose, not the inner…
Adapter for the Dewalt(TM) Airlock(TM) System to fit with the osVAC platform. Remix of original Thing ID 4512926. Fitting to the osVAC M32 connector 4671596 and therefore can be used with the complete osVAC setup. I printed it with PLA…
adds a bigger bottom plate to the trim router for increased stability and better dust collection. I used PETG for improved strenght. Top plate might need some supports. Used hardware: 4*M4x8 4*M4x12 4*M4 threaded inserts
This is a adapter for the quite popular Bosch GTS 10 XC professional table saw to a dust collector system using the osVAC system. The adapter fits neatly in the recess of the table saw. On the dust collector end is a male 32 osVAC…
osVAC Adapter for Bosch GEX 125-1 AE
An 80mm nozzle for osVAC mount. Prints without support.
This is a osVAC M32 adapter for the Bosch GST 12V-70 jigsaw. It is secured with 3 screws. The inner diameter is 28 mm, maybe it fits on similar tools. You'll also need: 3* 3x10 wood/universal screws (optional) o ring R21 I recommend to…
osVAC neo M32 adapter for Makita DSP600ZJ The adapter is clamped by means of a screw (M3x10) and nut (M3). This allows the adapter to be mounted and dismounted very quickly and easily. Since the machine with mounted osVAC adapter does not…
Adapter for Bosch PEX300 and PEX400 orbital sander. Tight fit, might fit other Bosch sanders as well if they have the same connector. The design is off center to achieve a larger distance of the hose to the work piece, make sure to attach…
I mad an adapter for my Bosch GEX 125-1 AE executer grinder. There is a rubber seal at the end and I designed a notch in the adapter. It's hard to push it over but afterwards it stays secure in place.
This an osVAC neo M32 adapter with handle for Kärcher accessories. --- Ein osVAC neo M32 Adapter mit Griff für Kärcher Zubehör.
English: Remix of the original osVAC adapter F32-H32 ( https://www.thingiverse.com/thing:4562762 ) with a 0.25 mm gap in the slipring. My Voron could not cope with the original 0.2 mm. German: Remix vom originalen osVAC Adapter F32-H32 (…
osVAC adapter for Bosch GAS 12V vacuum. If you have a 37x32x2.5mm O-ring at hand, you can insert it for a leak tight connection. If you don't, this will be as good as any other osVAC connector. Enjoy Update: print with the nozzle facing…
Passend zum osVAC System hier ein "Blindstopfen" mit M32 (männlichen) osVAC Adapteranschluss. Damit lässt sich einfach Schlauch an der Kupplung (F32, "Base Adapter") schnell verschliesen. Recht praktisch falls man z.B. mehrere Schläuche…
osVAC Adapter for a 40mm hose.
This is an adapter for Menzer ETS 150 orbital sander to osVAC vacuum adapter system. Menzer seems to have quite variable diameters. This on has 44,8 mm outer diameter. Maybe you need to scale in your slicer. If you like my work and want…
osVAC adapter for FESTOOL machines For me, the "longer version" of the osVAC FESTOOL adapter did not work on renovation milling machine RG 130 E-Plus. So I have built from the "longer version" an "even longer version" ;-) Technically…
osVAC Adapter for the lower vaccuum port of the DeWalt DWE 7492 table saw. I printed in PETG, but other materials should work, too. No supports needed when you print with the table saw side facing the printing bed. Feedback Feedback?…
männlicher Absaugadapter für das osVAC-System kompatibel zu Bosch GCM 12 GDL
An adapter for the typical included tubes and vaccum tools from Kaercher WD ultra-slim design and fits tight. Another missing Kärcher WD adapter for the awesome osVAC system.
OSVac M32-R41 (41mm inside dimension) Check out our YouTube channel for more maker and osvac content: https://www.youtube.com/c/Bastelsaal You like our work? Feel free to buy us a coffee! ❤
osVAC M32-R50 (50mm inside dimension) We used the part in this video: https://www.youtube.com/watch?v=fklvx3djcHE&ab_channel=Bastelsaal You like our work? Feel free to buy us a coffee! ❤
osVac adapter for Scheppach HMS850 jointer & thickness planer. Thanks to https://www.thingiverse.com/tokenizer for the great Fusion 360 files! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No…
This is an osVAC neo M32 to H20 adapter for 20mm hoses. I am using a 20mm Mirka hose with this osVAC neo F25-H20 adapter to connect my machines. Works flawlessly! osVACneo-H20M32-02 works best for 0.4 nozzles at 0.2mm layer height…
Good day, printhead's! Designed this for my workshop Dewalt DWE7492 power tool vacum connection. Also, because I use osVAC system all over the shop, added male end to both vacum connections. osVAC male ends M32 Dewalt outlet D60…
