1 / 11
Bosch 28mm (e.g. GKS GST GEX 12V) osVAC vacuum connector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
osVAC connector for BOSCH 28mm vacuum connector
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 275
- Wydruki
- 4
- Wyświetlenia
- 2084
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 4) (Komentarze: 5)Remiksy (0)Kolekcje (84)Powiązane
This osVAC adapter fits the Bosch 28mm dust extractor connection. Tested on my 12V circular saw and on the multi cutter (Stichsäge) and GEX random orbital sander.
There are two versions of the adapter, a larger one where the osVAC connector is at an angle and a tiny one, which fits directly on the connector.
For sealing and a tight fit I used an O-ring 20x27x3.5mm but you can also use some tape to achieve a tight and permanent fit.
Category: Tools
