osVAC neo M32 - Makita DSP600ZJ
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
osVAC neo M32 adapter for Makita DSP600ZJ The adapter is clamped by means of screw (M3x10) and nut (M3).
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 154
- Wydruki
- 0
- Wyświetlenia
- 788
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
osVAC neo M32 adapter for Makita DSP600ZJ
The adapter is clamped by means of a screw (M3x10) and nut (M3). This allows the adapter to be mounted and dismounted very quickly and easily. Since the machine with mounted osVAC adapter does not fit in the MAKPAK, this was a compromise I can live with.
Unfortunately, I did not succeed in creating a design that can remain permanently mounted. The space conditions of the machine in the MAKPAK do not allow this in my opinion.
The part can be printed with very few support structures. See corresponding picture.