1 / 2
osVAC neo 40 mm Hose Adapter (e.g. for Starmix Vacs) — zdjęcie 1
1 / 2

osVAC neo 40 mm Hose Adapter (e.g. for Starmix Vacs)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an adapter from 40 mm (inner diameter) vac hose to the F32 and M32 osVAC standard.

Ocena
5 / 5
Polubienia
34
Pobrania
426
Wydruki
1
Wyświetlenia
2226
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Adapters from 40 mm vacuum hose to male and female 32 mm osVac. 

I've only tested the female one so far.

I used the Fusion 360 project provided by odul from the woodworker.de forum and changed the hose diameter to 40mm. Worked first try in PLA. I had to use a knive and some force to loosen the 360° slide mechanism.

Update 2026-08-31: I needed to reprint it and wasn't able to get the rotary mechanism free, even after several attempts with different filaments. That's why I've altered the gap shape to be more print-friendly and added it as V2. That worked way better.

Tagi