Aerodynamic ducted motor mount for "40 mm Hobbyocean EDF" - RC plane (open source)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ducted motor mount for "40mm EDF" by "Hobbyocean". Ducting enhances thrust and efficiency. FreeCad source included.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 646
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Aerodynamically designed ducted EDF motor mount for the “40mm Hobbyocean EDF”. Designed for LIDL chuck glider to RC conversion, but suitable for other models as well.
Print without supports, optionally a brim if you prefer.
The motor is geometrically locked in and will push itself into the motor mount during flight. Remove the existing duct that comes with the product first, it is only held by adhesive tape. Once the EDF is inserted into the 3d printed mount, apply a small amount of glue in the specially designed slots to fixate the EDF (see last picture). The glue is only there to hold it and is not stressed during use.
The ducting helps to push/compress more air into the EDF, enhancing thrust and efficiency at speed.
FreeCad source file included for easy modification. The ducting envelope is modified by editing the sketch of the revolve cross-section. High-resolution meshed STL included.