1 / 3
Matchbox No 29 Pumper truck hose/ladder/pipes assembly — zdjęcie 1
1 / 3

Matchbox No 29 Pumper truck hose/ladder/pipes assembly

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

As it says in the thing name. Replacement for frequently warped and busted back plastic piece for Matchbox No 29…

Ocena
0 / 5
Polubienia
5
Pobrania
129
Wydruki
0
Wyświetlenia
685
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution

As it says in the thing name. Replacement for frequently warped and busted back plastic piece for Matchbox No 29 Pumper truck (Fire Truck). This is designed by having a number of parts superimposed on each other, which seems to work fine in the Chitubox slicer for resin printers, YMMV. I've also included the .blend and the "PLATED" file which ultimately gave the best print results for me. Based on the remaining broken chunk of the original part that was left on mine and reference photos of the truck found online. I think I got pretty close.

Instead of a plastic rivet/rolled post I've made it a fit-n-click where you just press down firmly on it and it clicks into place. Be warned- do all your painting and finishing work before installing because once it's in place I haven't been able to successfully uninstall it.

Please feel free to remix and clean up the actual model a bit or make it fit a little better. You coudl also reconfigure the truck to maybe hold a ladder or whatever else strikes your fancy. I'm pretty pleased with the results I got so I ship.

Print Settings

Printer Brand:

Anycubic

Printer:

Photon

Rafts:

Yes

Supports:

Yes

Resolution:

.5

Infill:

nope

Filament: Siraya Resin - Blu Translucent Blue


Notes:

(Printed on an SLA resin printer. It might be possible to do this with an FDM printer but I've not attempted this)

Post-Printing =============

Washed in 91% alcohol and an old toothbrush. Rinsed in the alcohol you get at the big-box home improvement stores that comes in a paint thinner can, then cured under UV lampbefore carefully cutting off the supports. Supports were removed with a pair of flush-cut pliers, then the remaining bumps filed with a mini diamond needle file. I gave it two coats of Tamiya fine white primer then popped it into place on the truck.

Category: Toys & Games

Tagi