1 / 3
71-74 B-Body Mopar Cluster Bezel
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gauge Cluster for 71-74 B-Body Mopar
- Ocena
- 0 / 5
- Polubienia
- 11
- Wydruki
- 0
- Wyświetlenia
- 340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
***9/16/2025 - Added New-Rev version. These are all large files with very high detail that can be simplified in Orca slicer if needed.
- Left 3-3/8" enlarged by 1mm to resolve tight fit, otherwise needed shaving
- Side Mounting screw hole now 5mm instead of 7mm..
This is a new take on the 71-74 B-Body Rallye Dash allowing aftermarket gauge sets. Radio removed to allow 2 additional gauges in the radio area. Heater controls mount to the back with 2 screws.
Requirements:
If converting from a standard dash car, the wiper switch wires will need to be extended to reach
- Gauges: 3-3/8" and 2-1/16"
- Turn Signals/Brights Indicators: 12mm ½: LEDS - amazon.com/dp/B07D8G1VZJ
- Switches: Rallye Switches for Lights and Wipers
Recommended Settings:
- Material: PET-CF/GF
- Resolution: .20
- Walls: 4/5
- Bottom/Top Layers: 4/5
- Infill: 35% or higher
The Model is textured, you can choose between a wood grain texture, ABS texture, or a leather like texture. If printed at .42 with a .6mm nozzle the leather like texture is mostly ignored.
Added non textured Model: It is somewhat pixelated so not smooth, best printed with Fuzzy Skin