Raspberry Pi Zero W + Raspberry Pi Camera Slim Snap Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very thin case that fits both Raspberry pi Zero W and Raspberry Pi 24x25mm Camera. Has cutouts for each port.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
REQUIRES NO HARDWARE
The case consists of 2 parts, top and bottom, requires no supports, if the camera holding pieces don't fit the camera, are to tight, just cut them off and the case will still work perfectly. There is also a square cut out above the PI processor for a radiator, as in the images. The case can fit the long camera tape, as I did, but maybe I would recommend using the shorter one to not bend the tape so much. Feel free to comment.
Also published on MakerWorld:
https://makerworld.com/en/models/1810226-raspberry-pi-zero-w-raspberry-pi-camera-casehttps://makerworld.com/en/models/1810226-raspberry-pi-zero-w-raspberry-pi-camera-case