Raspberry Pi Zero W + Raspberry Pi Camera Slim Snap Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A very thin case that fits both Raspberry pi Zero W and Raspberry Pi 24x25mm Camera. Has cutouts for each port.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 42
- Makes
- 0
- Views
- 192
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
REQUIRES NO HARDWARE
The case consists of 2 parts, top and bottom, requires no supports, if the camera holding pieces don't fit the camera, are to tight, just cut them off and the case will still work perfectly. There is also a square cut out above the PI processor for a radiator, as in the images. The case can fit the long camera tape, as I did, but maybe I would recommend using the shorter one to not bend the tape so much. Feel free to comment.
Also published on MakerWorld:
https://makerworld.com/en/models/1810226-raspberry-pi-zero-w-raspberry-pi-camera-casehttps://makerworld.com/en/models/1810226-raspberry-pi-zero-w-raspberry-pi-camera-case