Magnetic Fastener for Cosplays
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Fastener i came up with for easy assembly of Cosplays/armors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
This magentic Fastener i cam up with is primarily made for cosplay armor pieces which need to be easy to put on but stay sturdy. I got fed up by magnets freeing themselves when just glued in so i over engineered this..
FOR ASSEMBLY:
put in your 4x10mm magnets and glue them in. after the glue dried, take the little plate and melt it in with an old soldering iron or similar. cut off the excess, sand a little of the melting got rough and enjoy!
the Hook is directional. pulling up will pretty easily detach the part, while down is very strong. i use it for attaching Leg pieces and Shoulder plates on my Cosplay Armor.