Ford 3-ton prototype USA (1918) / M1918
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/35 scale 3d model of the Ford 3-ton prototype tank developed in the us during the first world war
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 1/35 scale 3d model of the Ford 3-ton prototype tank developed in the us during the first world war (1918 to be specific)
Only 15 were ever made and none of them saw service, one was sent to france for testing though.
This model has some issues due to it being my first one ever, there are somethings you should do for the optimal model quality, they are listed below.
1.print everything in 50% speed (except the main body).
2.superglue is required for assembly.
3.pliers are required for support removal, a sidecutter or a scalpel come in handy as well.
4.be really careful when removing the supports (especially the struts on the thrench skid).
5.the pin connecting the body to the cannon doesnt really work so just try to line it up while gluing.
Even if its not that good im still proud of my work.
Btw the model is smaller than its supposed to be due to me being stupid,
for 1/35 scale make it 914.29% bigger and for 1/24 scale make it 1333.33% bigger.