Raspberry Pi 5inch Touch Display2 Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The support legs have been designed to suit the Raspberry Pi 5inch Touch Display2.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Raspberry Pi 5inch Touch Display2 Stand
The support legs have been designed to suit the Raspberry Pi 5inch Touch Display2.
https://www.raspberrypi.com/products/touch-display-2/
The screen has been set at an angle of 60 degrees which I have found to give a pleasing viewing angle.
Two legs are fitted to the screen back with 4x M2.5x6/8mm socket head screws.
Printed on 0.2mm PLA, no need for supports.
4x silicone self adhesive feet hold it firm on the workbench.
I've included a Step file as well as the stl as this will make it easier to make any adaptions you may need.
Hope this helps someone.