Raspberry Pi 5inch Touch Display2 Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The support legs have been designed to suit the Raspberry Pi 5inch Touch Display2.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Raspberry Pi 5inch Touch Display2 Stand
The support legs have been designed to suit the Raspberry Pi 5inch Touch Display2.
https://www.raspberrypi.com/products/touch-display-2/
The screen has been set at an angle of 60 degrees which I have found to give a pleasing viewing angle.
Two legs are fitted to the screen back with 4x M2.5x6/8mm socket head screws.
Printed on 0.2mm PLA, no need for supports.
4x silicone self adhesive feet hold it firm on the workbench.
I've included a Step file as well as the stl as this will make it easier to make any adaptions you may need.
Hope this helps someone.