e*thirteen XCX Race Crank Arm Bumper Protector e*13 e thirteen ethirteen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crank arm protector for e*thirteen XCX Race carbon crank.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 103
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A custom fit crank arm protector/bumper for e*thirteen XCX Race carbon cranks.
I had tried a few, including one for another e*thirteen crank that, even with some creative scaling, just didn't fit right. So, I broke out the calipers.
I printed in TPU at .2 layer height with 3 walls and 10% gyroid infill using tree supports. Intended to be a snug slip fit when printed from TPU. May need to be scaled up slightly for rigid filaments.
Exact fit model: For best fit, print in “exclusive” mode (Cura) or equivalent; otherwise, you may need to adjust horizontal expansion and/or scaling slightly.