e*thirteen XCX Race Crank Arm Bumper Protector e*13 e thirteen ethirteen
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Crank arm protector for e*thirteen XCX Race carbon crank.
- Rating
- 5 / 5
- Likes
- 0
- Downloads
- 28
- Makes
- 1
- Views
- 104
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A custom fit crank arm protector/bumper for e*thirteen XCX Race carbon cranks.
I had tried a few, including one for another e*thirteen crank that, even with some creative scaling, just didn't fit right. So, I broke out the calipers.
I printed in TPU at .2 layer height with 3 walls and 10% gyroid infill using tree supports. Intended to be a snug slip fit when printed from TPU. May need to be scaled up slightly for rigid filaments.
Exact fit model: For best fit, print in “exclusive” mode (Cura) or equivalent; otherwise, you may need to adjust horizontal expansion and/or scaling slightly.