Modular Adapter Plate with Dovetail Joint and Tube Holder (Rolly Toys Tractor Accessory)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a custom modular adapter designed for mounting accessories on a Rolly Toys kids’ tractor.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a modular adapter system for Rolly Toys tractors.
Description
It consists of an adapter plate that mounts to the tractor using the standard pin, and a dovetail connector that allows you to slide on different modules.
This version includes a tube holder (Ø29.5 mm with a flat side), which is designed for the micro scooter T-bar.
The design is optimized for 3D printing:
Dovetail joint → 30° opening angle, 60 mm insertion length, prints without supports.
Child-friendly → rounded edges, chamfers, and no sharp corners.
Outdoor use → recommend PETG or ASA for UV/weather resistance. I used PLA so far.
Print settings (tested with PrusaSlicer 2.9.2 on a Prusa MK4)
Layer height: 0.20 mm (STRUCTURAL profile)
Infill: 15% (Grid)
Supports: Only on the build plate
Material: Prusament PLA (PETG/ASA recommended for outdoor use)
Print orientation: Parts laid flat, as shown in preview (adapter plate horizontal, tube holder upright)
Build time: ~7h 20m
Filament usage: ~175 g
Notes
I'm a CAD beginner, so this is a learning project with flaws. Feel free to improve and share feedback!
The dovetail joint was designed with 0.25 mm clearance per side. It is not very tight, less clearance will probably work too.
Fits great on John Deere 6210R.