Laptop vertical mount for Flexispot desk / 16,5mm thickness
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A vertical Laptop holder on the edge of the desk. Made for 16,5mm desk thickness and up to 30mm thick Laptops.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
A vertical laptop mount at the edge of a table with the thickness of 16,5mm and a max laptop thickness of 30mm. With a screwhole to secure the laptop and holder to the desk.
I have a flexispot table which is 1,2m wide, but I need too juggle between 3 Laptops on it.
This gives me back much needed space and I dont have to worry about them getting damaged by stuff or a coffee spillage.
I printed in eSun PLA+, 3 walls and 10% infill. They are really strong, but if you want to make sure they dont deform because of the warmth of the laptops, print in another material like ASA or PETG.
I deliberatly spread them out to the edges of the laptops, where they are cool even under load.
Keep in mind, that you put your laptop in it with the backside facing up, so the vents release the air up and away instead of directly on the holder. also the cpu/gpu of most laptops are located at the back half of the laptop.