Frontless IKEA Maximera Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on corners for the front of the IKEA Maximera drawers. Keeps the metal rails from deforming.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Public Domain
A left and a right corner that allows you to use the Maximera drawer without a front board. So you can put a printer in the drawer without it drooping, and still access the control panel and open the door and stuff.
It's a bit of a pressfit, I printed it in ASA and with 15% and 30% infill, they both work.
Never used the screws to screw it on, it seems to hold.
The fusion model has a stick that has a hook that could connect to the wire loop in the drawer - but it always breaks off when tightened. Probably needs a separate part that joins, but it's not necessary for keeping the edges in shape.