Streamdeck Wallmount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made a wall mount for a stream deck to use as an interface for home assistant
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This one was designed for the Streamdeck .mk2 not sure if it works on the older version.
The mount was designed to hold a Streamdeck .mk2 and space behind it to hold a raspbery pi zero in the back. There is two zip tie slots inside in the back to hold onto a small pi zero enclosure.
While Pi-zero can't run a stream deck directly it can be used as a usb server to allow a windows computer to connect to the streamdeck across the network. I'm using “vitural here” software for the usb server.
Front plate is mounted onto the box using 4 mm screws, use 4mm heat inserted threaded inserts in the box.
As with anything use at your own risk.