Streamdeck Wallmount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a wall mount for a stream deck to use as an interface for home assistant
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This one was designed for the Streamdeck .mk2 not sure if it works on the older version.
The mount was designed to hold a Streamdeck .mk2 and space behind it to hold a raspbery pi zero in the back. There is two zip tie slots inside in the back to hold onto a small pi zero enclosure.
While Pi-zero can't run a stream deck directly it can be used as a usb server to allow a windows computer to connect to the streamdeck across the network. I'm using “vitural here” software for the usb server.
Front plate is mounted onto the box using 4 mm screws, use 4mm heat inserted threaded inserts in the box.
As with anything use at your own risk.