Stealth Press 1S Stable Base Upgrade
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional feet on the rear of the base add stability and prevent the press from falling over backwards!
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 107
- Wydruki
- 3
- Wyświetlenia
- 871
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
I had some problems with the original press being top-heavy and tending to fall over backwards. I remixed the original stealth press model to add a “foot” to the rear of the base to prevent this from happening. I also modified the aesthetic of the base slightly without changing the original functionality.
The two parts from this remix replace the leg_x1_r1s.stl file from the original Stealth Press 1S. The extension is attached to the main base using 3x M3 screws.
You'll need the following additional hardware to use this remix:
| Part | Size/Standard | QTY |
| M3 Bolt | M3x8 SHCS | 1 |
| M3 Bolt | M3x25 SHCS | 2 |
| M3 Threaded Heatset Inserts | M3xOD:5xL:4 | 3 |
All credit for the original files goes to Iconic FAB and their Stealth Press 1S: https://www.printables.com/model/1081157-stealth-press-1s-heat-set-insert-press