Stealth Press 1S Stable Base Upgrade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Additional feet on the rear of the base add stability and prevent the press from falling over backwards!
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 107
- Makes
- 3
- Views
- 871
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- GNU General Public License v3.0
I had some problems with the original press being top-heavy and tending to fall over backwards. I remixed the original stealth press model to add a “foot” to the rear of the base to prevent this from happening. I also modified the aesthetic of the base slightly without changing the original functionality.
The two parts from this remix replace the leg_x1_r1s.stl file from the original Stealth Press 1S. The extension is attached to the main base using 3x M3 screws.
You'll need the following additional hardware to use this remix:
| Part | Size/Standard | QTY |
| M3 Bolt | M3x8 SHCS | 1 |
| M3 Bolt | M3x25 SHCS | 2 |
| M3 Threaded Heatset Inserts | M3xOD:5xL:4 | 3 |
All credit for the original files goes to Iconic FAB and their Stealth Press 1S: https://www.printables.com/model/1081157-stealth-press-1s-heat-set-insert-press