Ultimulti MMU3 Corebox - LegZ27 connector on the Prusa CORE One MMU3 Community version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and dirty LegZ27 remix allowing to keep the Ultimulti legs previously prepared for Coreboxx
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My Ultimulti had its legs prepared to be installed on my Coreboxx premium, but I also wanted to try the MMU3 Community Edition with Ultimulti. Since the legs on Ultimulti for Coreboxx are a bit touchy to install and are very near the electronics, I didn't want to install the legs provided by NicolasZ and rather adapt the Legs Z27 to the corresponding holes.
I printed my parts with Prusament PETG Jet Black, 3 walls, cubic infill 10%. 0.20 Structural profile.
You will need 4 x M3x10 BHCS screws to install the 2 parts.