Ultimulti MMU3 Corebox - LegZ27 connector on the Prusa CORE One MMU3 Community version
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A quick and dirty LegZ27 remix allowing to keep the Ultimulti legs previously prepared for Coreboxx
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 8
- Makes
- 0
- Views
- 354
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My Ultimulti had its legs prepared to be installed on my Coreboxx premium, but I also wanted to try the MMU3 Community Edition with Ultimulti. Since the legs on Ultimulti for Coreboxx are a bit touchy to install and are very near the electronics, I didn't want to install the legs provided by NicolasZ and rather adapt the Legs Z27 to the corresponding holes.
I printed my parts with Prusament PETG Jet Black, 3 walls, cubic infill 10%. 0.20 Structural profile.
You will need 4 x M3x10 BHCS screws to install the 2 parts.