Counting matching models…
After the success of my enXLosure for Prusa XL, I am excited to announce my latest Project; COREBOXX → The Filament Storage System for Prusa CORE one! COREBOXX is an all-in-one platform for neatly storing, organising, and managing…
The COREBOXX Semi-Smart is an advanced electronic upgrade for your filament storage system, enhancing usability, safety, and functionality. This modular system integrates filament chamber heating, real-time monitoring, and quick control…
Dry filaments are especially important for reaching the printability and mechanical properties a material should provide, This is one of the main reasons for me to design COREBOXX. This model is made as an addition to the drying…
ⓘ Real pictures are coming soon! The Rewindr is a premium rewindable spool holder for the MMU3/MMU2. It's compact and easy to use, opposed to the official clunky setup for the MMU. Compatible with the Prusa MK4 , MK3 , CORE One , Original…
On high request, I made legs to mount UltiMulti inside coreboxx UltiMulti is an optimised MMU3 experience, with many upgrades like; Way better access to the filament path Easy opening of the idler with a clamp design Way better cable…
Just a few new parts to modify the original COREBOXX Premium setup: Wheel Sleeve : Looks and works better than the rubber band solution. To be printed in TPU with “Fuzzy Skin” in “Vase Mode”. Rewinder Mount : This mount provides more…
Ultimulti version for Coreboxx with double lock mainly to prevent fails I had with slots number 4 and 5 after sometime of use of the original with 1 lock. I made my own compilation of part I'm use, with this I have increased reliability…
Add RGB LED lighting to the inside of COREBOXX with Semi-Smart! The LED lights can be controlled via Prusa G-code, and can be used for; Printer status indication (see at a glance if your printer status is ready, done, in error, or paused)…
Support for coreboxx premium version mmu3 service hatch in order to make sure that the plexiglass doesn't break. Mount with 4 M3x18mm screws with 4 M3 Washers and 4 M3 selfsecuring Nuts to the coreboxx.
Just corrected version of Silica gel container for COREBOXX, where the original version is not fitting, maybe due to changes to gen2 panels.
This is a small handle to replace the hole in the Coreboxx MMU access panel. Make opening the door much easier and seals up the hole if using the Semi-smart heater. Printed in PETG with 0.4 nozzles default settings. Two versions of the…
To be sure, that some spool will not damage the main PCB of the SEMI-Smart addon, I have created this cover and also added space for four zip ties on it, so you can organize cables better. For now it is only prepared, waiting for the PCB…
There are basically 2 mods available here, in 3 variations… If you want to upgrade the screen to the SH1107 128x128 OLED and add COB WS2811 LED strips, then use the “Modified_3dmonkey_semismart_SH1107_COB_LEDs-v1.6.zip” file. If you want…
Print instructions Use TPU/Flex filament, tested with Overture TPU 95A: No support 15% infil
This is a remix of the rewinding spoolholder mounts for the COREBOXX Premium. I found the original spoolholder mounts held the spoolholders fairly loosely, and spools would wobble when the printer was running. Inspired by MIRE_19115's…
Just a less-wobbly quick fix for when the vent switch keeps coming off the screw for the vent itself. As always, please refer to the original COREBOXX documentation for installation and print settings.
I don't need (semi)transparent panels, so I created printable ones. Also, I thought it would be a quick and easy way to get panels. Surprise, it was not. Each panel consists of five parts. Two different panel parts, two of each and the…
I always wanted to have some box on the printer (when I got MMU3), but my printer is in a room, where is not so much light, so I wanted to add lights over filaments in the box and also to have any light in the box. Together with COREBOXX…
Just use the Coreboxx printing parameters, 3 perimeters, 25% infill, .2 layer height.
The Coreboxx comes with a top panel that allows air to escape from the CoreOne. While this design works fine in general, it is not ideal for filaments that require a stable heated chamber (such as ABS, ASA, or Nylon). To solve this, I’ve…
By default, the Prusa CoreOne and CoreBoxx setup doesn't include a dedicated filament dryer. This simple, yet effective, TPU duct allows you to harness the residual heat generated by your CoreOne 3D printer and direct it up into the…
Print without supports. Resized to fit the hole perfectly when printed in PETG Changed the shape of the slider.
Added a MMU3 cable pass through.
The What: This is a ground up designed complete replacement case for the BluRolls HBC-300W-24V power supply that comes with the CoreBoxx kit. The Why? I designed this to address several key points with the case model supplied with the…
Holder mod for Coreboxx dessicant to fit in Inbxx
BACKGROUND: (OR WHY DOES THIS EXIST?) There's been a whole lot of interest in the Filamentalist derived rewinders for Voxel3D's CoreBoxx. One issue with the original parts release and design is the use of rubber bands around the “tread”…
MMU Door Supports for CoreBoxx First Version Hinge
CoreBoxx Rewinder Tensioner Arm Mount Rebuild REVISION HISTORY: 10/19/25 - Initial Public Release: Step File v 1.0 .3mf Model v 1.0 .3mf Prusa Slicer Project v 1.0 The What: Scratch built rework of the Rewinder Tensioner Mount for…
After testing countless Y splitter designs available online, none of them fully satisfied me — there were always issues with calibration, filament loading/unloading reliability, or both. I ended up spending a significant amount of time…
Switched the hinges to the other side. so the door can be opened on the left and the hinges are on the right. When printing, don't forget to add the mouse ears for each of the frame pieces, so you prevent the warping. These pieces replace…
Added a flat base and an enclosure mount for the nicely designed Beacon Ventilation Knob for Core One by @Biomech to the beacon. I wanted to attach it not to the ventilation grid but to the side of my Prusa CoreOne as I plan to put the…
These brackets use the existing cable tie holes in the corner channels and are quick to print. Attach the brackets to the Coreboxx frame using 3mm wide cable ties. Install the LED strips in the channels and install the covers and you're…
This is a model created to measure dimensional accuracy/shrinkage for x-y axys as described below: IMPORTANT NOTE: PETG, ASA, ABS and other materials slightly shrink after printing. This shrinkage can be up to 0.50%. This might look…
Added MMU compatible markings for open and close positions.
Hygrometer support for Coreboxx Print with 15% infill and support. Can be print in PETG or PLA
Simply use hooks to manage cable arrangement or anything else in your Coreboxx. You have to use: inserts: M3 x 5 x 4 M3 * 16 (replace existing M3 screws with those) No support required, can be printed in PLA or PETG.
Petg 3 strati 25% riempimento
Introduction / Einführung Smart Rewinder is a sensor equipped, microcontroller-managed ative filament spool management system as DIY project. It is designed for Prusa printers equipped with MMU3, such as CORE One, MK4, and MK3, but it…
This is a modified version (Remix) of the original ESP32 camera case, specifically designed to mount inside a Coreboxx on the middle top. Its purpose is to monitor your filaments during 3D printing: Print instructions: PLA or PETG 15%…
Make sure to enable stealth mode, it seems to matter on this print for some reason. This made for a very strong case once it completed due to the diagonal layer lines. Otherwise, the 3mf should have what I used to gain a successful print.…
This model utilizes the MMU floor mount designed by @MIRE ( Collection of mods for coreboxx premium) V2 is ready and I'm much happier with it. It raises the MMU 30mm over the V1 to give the out PTFE a better angle to the slot in the…
DIAGOSING THE ISSUE Quick Things To Check Directional Check: First you need to make sure the one way bearing is installed facing the right way. The one way bearing should only engage when the filament is being pushed back towards the…
This is the coreboxx switch but with raised areas that can be colored to indicate the direction of open and closed. I oroginally tried to place the words open and closed with arrows but couldn't figure out how to do it on the curve and…
Add light to your Coreboxx with and ESP32 and WLED case. Super useful to control and automate with Home Assistant. The ESP32 is used with a buck converter module to be pluggable directly to the Core One motherboard. You can follow the MMU…
Changes compared to the original Coreboxx premium version: Better rubber support. They do not move anymore across the roller Longer edges to avoid spools moving out of rollers Avoid spool cardboard with irregular forms to have random issues
I found the rim roller bands included in the Bluerolls kit for the COREBOXX Premium model to be... lacking. They were undersized width-wise & had wavy edges, like they had been hand cut from a bike tire tube. Since I couldn't find any…
Just a few new parts to modify the original COREBOXX Premium setup: Wheel Sleeve : Looks and works better than the rubber band solution. To be printed in TPU with “Fuzzy Skin” in “Vase Mode”. Rewinder Mount : This mount provides more…
This model utilizes the MMU floor mount designed by @MIRE ( Collection of mods for coreboxx premium) V2 is ready and I'm much happier with it. It raises the MMU 30mm over the V1 to give the out PTFE a better angle to the slot in the…
Changes compared to the original Coreboxx premium version: Better rubber support. They do not move anymore across the roller Longer edges to avoid spools moving out of rollers Avoid spool cardboard with irregular forms to have random issues
After my enXLosure project for Prusa XL, I am excited to announce; COREBOXX → The Filament Storage System for Prusa CORE one! COREBOXX is an all-in-one platform for; Neatly storing, organising, and managing filament in an enclosed space…
This listing provides the production files for the COREBOXX Heated Semi-Smart add-on, optimized for JLCPCB. For assembly instructions and details, refer to the main listing on Printables. COREBOXX Heated Semi-smart add-on by…
![[Updated] Rewindr - Setup for COREBOXX](https://media.printables.com/media/prints/44356850-a5c2-4570-ba03-d3cb758fade9/images/9352161_944e7125-63e0-45b2-8045-ed7bfb72c535_81e8443a-8b0b-456f-bdc6-b6dd8b1cff36/download.png)
