Ultimulti with double lock for Coreboxx
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€13.90 – €16.99 net (excluding VAT)
For file: ultimulti_coreboxx_0.4n_0.2mm_PETG_COREONEMMU3_13h32m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €15.45 excluding VAT (range midpoint).
- Weight reported by the author
- 250 g
- Print time reported by the author
- 13.53 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Improve reliability of the original mmu3 and ultimulti with a custom selection of parts
- Rating
- 5 / 5
- Likes
- 55
- Downloads
- 269
- Makes
- 10
- Views
- 1,182
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ultimulti version for Coreboxx with double lock mainly to prevent fails I had with slots number 4 and 5 after sometime of use of the original with 1 lock.
I made my own compilation of part I'm use, with this I have increased reliability by 100% so far (around 12000 changes till now) obtaining 0 failures in the mmu3 unit in the process of loading, unloading and selecting filaments, even with low quality filaments that are not always 1.75mm or more "sticky" like the bright ones.
Specs:
Double locking for even bearing pressure across the entire idler.
Remixed idler to prevent horizontal movement and bearing knocking.
B15 PTFE front holder to improve finda attachment and filament cut.
B19 selector with conical filament entry.
Remixed selector for M6.
M6 collet holder.
Legs with M3 inserts for the CoreBoxx.
Remember to use 4x2.5 ptfe tubes in all the travel of filament! Even the 19mm ptfe's of the holder and please note that the tube must pass through the entire idler body and holder. Make sure your coupling allows the PTFE to pass through as shown in my fourth image.
For people that already made the ultimulti and wants to add this improvements, just need to print and reassemble with:
*CLASSIC_PULLY BODY_B10
*CLASSIC_IDLER_BODY_B35
*lock_right_b32
IDLER_B17r_remix_rattle_free
FRONT PTFE HOLDER B15_EXPERIMENTAL
SELECTOR_B19_EXPERIMENTAL
The marked with * are the only ones needed to get dual lock.
Obviously, this build isn't exclusive to CoreBoxx, but it's where I've extensively tested it.
You can use the legs provided with the original UltiMulti if you plan to use it outside of the CoreBoxx.
For assembly instructions you can follow prusa guidelines and ultimulti docs:
https://help.prusa3d.com/manual/mmu3-assembly-mk3s-mk3-5-mk3-9-s-mk4-s-core_1757
https://www.printables.com/model/537888-mmu3-ultimulti-printable-parts