Shrinkage Test for CoreBoxx and Prusa XL - EnXLosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple shrinkage test designed for CoreBoxx and Prusa XL - EnXLosure designed by Voxel3d
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 22
- Makes
- 0
- Views
- 146
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a model created to measure dimensional accuracy/shrinkage for x-y axys as described below:
IMPORTANT NOTE:
PETG, ASA, ABS and other materials slightly shrink after printing. This shrinkage can be up to 0.50%. This might look little, but even this relates to 2mm on the longest part.
Therefore I suggest printing the shrinkage tool first at 100% scale and measuring the shrinkage of your petg material. After this, scale all parts with this value to get the correct results.
Instructions:
- print shrinkage tool at 100% scale in your material. (Infill 25% cubic / 2 or 3 perimeters)
- measure the sizes of the print, it should be 200mm long.
- Divide 200 by the value you measured to get your shrink percentage.
- Example; measured the length to be 180mm.
- Calculate shrinkage; 200 : 180 x 100 = 100.11%
- To compensate for shrinkage, print at 100.11%
- Print the shrinkage tool again at your found scale in the same material - Verify the length of tool. It should be 200mm. A deviation of 0.4 +/- is acceptable.
Original text from Voxel3d, dimensions changed in the current example, according to the model designed.
