1 / 6
Reversed Mounting Legs for mounting Ultimulti MMU3 to floor of the Coreboxx — image 1
1 / 6

Reversed Mounting Legs for mounting Ultimulti MMU3 to floor of the Coreboxx

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Modified the rear wall ultimulti mounts for the Coreboxx to allow for a floor mount option.

Rating
0 / 5
Likes
2
Downloads
12
Makes
0
Views
117
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This model utilizes the MMU floor mount designed by @MIRE (Collection of mods for coreboxx premium)

V2 is ready and I'm much happier with it.  It raises the MMU 30mm over the V1 to give the out PTFE a better angle to the slot in the coreboxx.  It also gives some clearance from the bottom to allow for my active rewinder motherboard.

Print instructions

Before you start printing G-codes or individual parts, read the notes below each file.

Download the latest PrusaSlicer and use the following settings*:

  • Print settings: 0.20mm STRUCTURAL

  • Filament: PETG (tested on Prusament)

  • 15% Gyroid infill

* Note that print settings are recommended, but you can experiment with your own. 

Tags