1 / 6
Reversed Mounting Legs for mounting Ultimulti MMU3 to floor of the Coreboxx — zdjęcie 1
1 / 6

Reversed Mounting Legs for mounting Ultimulti MMU3 to floor of the Coreboxx

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified the rear wall ultimulti mounts for the Coreboxx to allow for a floor mount option.

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
114
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This model utilizes the MMU floor mount designed by @MIRE (Collection of mods for coreboxx premium)

V2 is ready and I'm much happier with it.  It raises the MMU 30mm over the V1 to give the out PTFE a better angle to the slot in the coreboxx.  It also gives some clearance from the bottom to allow for my active rewinder motherboard.

Print instructions

Before you start printing G-codes or individual parts, read the notes below each file.

Download the latest PrusaSlicer and use the following settings*:

  • Print settings: 0.20mm STRUCTURAL

  • Filament: PETG (tested on Prusament)

  • 15% Gyroid infill

* Note that print settings are recommended, but you can experiment with your own. 

Tagi