1 / 2
Qidi Q2 Chamber Exhaust Fan Duct Coupler
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Coupler for the Q2 to attach a 3" hose to vent fumes.
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 381
- Wydruki
- 0
- Wyświetlenia
- 1912
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 6)Remiksy (2)Kolekcje (84)Powiązane
Use to attach a 3 inch vent hose to the exhaust port on the Qidi Q2. You will need to stretch over the coupler as this is a bit larger than 3 inches but provides a snug fit to the hose. Printed in PETG. I used m3x8 self-tapping screws.