Expandable parts organiser - Repurpose empty Sunlu filament spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repurpose empty Sunlu filament spools into useful storage containers
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 98
- Wydruki
- 0
- Wyświetlenia
- 696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Edit - Models included to suit spools with a 50mm & 53mm spacing.
Here are parts required to build a storage ‘tower’ from all those empty Sunlu plastic filament spools.
If using a single spool you will require minimum 3 drawers and 3x pins.
If planning to stack spools, start with the base, add a spindle, place spool with drawers, add shim if necessary. Top off with another spindle if adding more drawers or the retaining nut.
I noticed some height variation between the spools, so included is an optional shim (scale height as necessary) to use during assembly. The spools should be able to rotate freely on the central column when assembled.
The drawer lower pivot pin is is a gentle press fit in drawer cavity. Scale pin diameter as necessary to obtain required size.
My Print settings
Printed with 0.6mm nozzle (0.62mm line width)
Layer height 0.24 (Not important)
Infill 15% (Seems OK, more wouldn't hurt)
Perimeters - 3 (walls will come out 2 perimeters thick if using same nozzle and line width parameters)
Solid layers, 4 Lower & 4 Top
Supports - Not required