1 / 3
Expandable parts organiser - Repurpose empty Sunlu filament spools — image 1
1 / 3

Expandable parts organiser - Repurpose empty Sunlu filament spools

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Repurpose empty Sunlu filament spools into useful storage containers

Rating
0 / 5
Likes
15
Downloads
98
Makes
0
Views
696
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Share Alike

Edit - Models included to suit spools with a 50mm & 53mm spacing.

Here are parts required to build a storage ‘tower’ from all those empty Sunlu plastic filament spools.

If using a single spool you will require minimum 3 drawers and 3x pins.

If planning to stack spools, start with the base, add a spindle, place spool with drawers, add shim if necessary. Top off with another spindle if adding more drawers or the retaining nut.

I noticed some height variation between the spools, so included is an optional shim (scale height as necessary) to use during assembly. The spools should be able to rotate freely on the central column when assembled.

The drawer lower pivot pin is is a gentle press fit in drawer cavity. Scale pin diameter as necessary to obtain required size.

My Print settings
Printed with 0.6mm nozzle (0.62mm line width)
Layer height 0.24 (Not important)
Infill 15% (Seems OK, more wouldn't hurt)
Perimeters - 3 (walls will come out 2 perimeters thick if using same nozzle and line width parameters)
Solid layers, 4 Lower & 4 Top
Supports - Not required

Tags