Y axis mount motor holder UPGRADE prusa Mk3 / Mk3s / Mk3s+ Threaded inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Y holder motor upgrade Better alignment, Less noise / vibrations from Y motor Threaded inserts for easy and rigid fixing
- Ocena
- 4,889 / 5
- Polubienia
- 76
- Pobrania
- 443
- Wydruki
- 13
- Wyświetlenia
- 2891
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike

Y holder motor upgrade for Prusa Mk3 Mk3s Mk3s+
Upgrade your Nema 17 mount to improve vibrations, noise, belt alignment and rigidity.
→ Easy screwed to panel with strong ruthex M3 Threaded inserts.
→ 1mm gap between motor and rear panel.
→ x3 mouting screws used for better rigidy of the motor.
→ +0.5mm offset motor for perfect belt alignment.
→ All screws you need are on your Prusa spare bag.
Last update : 07 march 2022
Motor is now fixed to the holder by 3x M3 screws ( thx to poy74fl ) and move back to 0.5mm for perfect Y belt alignement on the shaft.



Products list :

- 3x Hex M3 10mm
- 2x Hex M3 30mm
- 2x ruthex threaded inserts M3S 4mm

You can improve this upgraded Y axis holder by replacing the top ruthex M3S 4mm and its Hex M3 10mm by 1x ruthex M3 5.7mm and 1x Hex M3 12mm.
Printing instructions :
- PETG / PC / ASA / ABS
- 4 perimeters
- 50% Gyroide infill
- 0,15 mm layer height
You enjoyed this part?
Publish your print and support me with a 5 stars and a like !
Why ruthex M3 nuts instead cheaper nuts ?
What's the problem with the Prusa factory design mount for Y motor ?
Factory design Y holder motor part has differents issues :
- Wrong angle of the motor axle
When you screw it on the rear panel of the frame, the motor axle is no more perpendicular to Y axle. - Bad belt tension
The motor axle misalignment cause not fit perfect with the belt and can cause belt tension issue - Noise and vibrations
The Y motor touch the rear panel and noises and vibrations are amplified significatively on the frame. - Brittle screw of the motor
The Y motor should be fixed by 4 screws to the holder but the factory design use only 2

Amélioration du support moteur Y pour Prusa Mk3 Mk3s Mk3s+
Upgrade le support de fixation du moteur Nema 17 pour réduire les vibrations et le bruit, gagner en rigidité et centrer plus efficacement la courroie Y sur l'axe.
→ Vissage facile au châssis avec les fameux inserts filetés ruthex M3
→ Espace d'1mm entre le moteur et le châssis.
→ x3 vis M3 sont utilisée pour fixer le moteur à son support pour une excellente rigidité.
→ Décalage du moteur de 0.5mm pour un alignement parfait de la courroie.
→ Toutes les vis nécessaires au montage sont dans le sachet “Spare” fournit par PRUSA
Dernière MAJ : 07 mars 2022
Le moteur est désormais fixé au support par 3 vis M3 ( merci à poy74fl ) et légèrement reculé de 0.5mm pour un parfait centrage de la courroie Y sur l'arbre d'entrainement.



Products list :

- 3x Hex M3 10mm
- 2x Hex M3 30mm
- 2x inserts filetés ruthex M3S 4mm

Vous pouvez encore améliorer la fixation en remplaçant l'insert du haut M3S et sa vis M3 10mm par 1x ruthex M3 5.7mm et 1x Hex M3 12mm.
Instructions d'impression :
- PETG / PC / ASA / ABS
- 4 perimètres
- 50% remplissage Gyroide
- 0,15 mm hauteur de couche
Vous aimez cette pièce ?
Publiez votre impression et aidez moi avec un j'aime et 5 étoiles !
Pourquoi un insert fileté ruthex au lieu d'un insert moins cher ?
Quel est le problème avec le support moteur Y d'origine Prusa ?
Le design de la pièce d'origine présente plusieurs défauts :
- L'axe du moteur n'est pas parfaitement perpendiculaire à l'axe Y
Quand vous vissés le support moteur au cadre arrière de la Prusa, le moteur prend légèrement de l'angle et sont axe n'est plus perpendiculaire à l'axe Y. - Mauvaise tension de la courroie
Le désalignement de l'axe du moteur provoque une tension inégale sur la courroie Y. - Bruits et vibrations
Le moteur Y touche le châssis arrière ce qui amplifie le bruit et les vibrations lors des impressions. - Fixation fragile du moteur Y à son support
Le moteur Y Nema 17 est prévu pour être fixé par 4 vis à son support. Le support Prusa n'utilise que 2 vis ce qui entraine une souplesse indésirable de sa fixation.
Remix of https://www.printables.com/model/68625-juiced-y-motor-holder