1 / 4
Power Strip Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim Mount for Brennenstuhl Power Strip
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (3)Powiązane
About
This is a mount for the "Brennenstuhl Alu-Line" power strip: https://www.brennenstuhl.com/en-DE/products/extension-leads/premium-alu-line-extension-lead-with-switch-4-way-1.8m-h05vv-f-3g1.5
This design was created for the 4-way power strip with the euro-plug. To adapt this design to longer versions I included the step files for this project. In case you want to check the geometry first, I included a dedicated file.
Choose between two different designs (stripes & blank) or create your own w/ the step files.
BOM
| Cylinder head screw M3 | 8x |
| Threaded heat inserts M3 | 8x |
| Flat head wood crew | 4x |
Assembly
- Remove the aluminium casing of the power strip to be able to slip on the mount.
- Install the threaded heat inserts in the dedicated spots of the end caps (4 each).
- Slide on the holder + end caps on the power strip.
- Assemble holder + end caps w/ 4 M3 screws. (An allen key w/ a rounded head is required.)
- Install the mounts to the assembly using the leftover M3 screws.
- (Optional: Use the flat head screws to fixate the mount to a surface.)