Replacement Tappet for Surefeed Sealed Pet Bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Tappet for Surefeed Sealed Pet Bowl
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 296
- Wydruki
- 3
- Wyświetlenia
- 1552
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
The tappet of the Surefeed Sealed Pet Bowl is a bit weak, becomes brittle over the time and breaks after a few years.
This part can replace this tappet making the bowl working again.
For better stability and to prevent the need of supports I took the arm and the axle apart. So they can be printed in the best position for a higher strength.
It looks not so sophisticated like the original part but is much stronger.
Print Settings
Printer:
FIashForge Dreamer
Rafts:
No
Supports:
No
Resolution:
0.10 mm
Infill:
100%
Filament:
PLA white
Notes:
It's highly recommended to use a 0.2mm nozzle.
Post-Printing =============
The axle fits tight in the arms hole. No glue is necessary.
Category: Replacement Parts